User manual for digitech audio AA-2014 - DIGITECH Music

You have probably damaged the board that the plug is attached to.

Contact maker Support at the bottom of the page.

https://digitech.com/dp/rp1000/

..

You can use this manual. It will help you.

Specifications - DigiTech XC-0230 User Manual [Page 2] ' ManualsLib

Try a reset. you are the only one with this issue.

Factory Reset - DigiTech VOCAL 300 User Manual [Page 10]

https://www.manualslib.com > ... > User manual
To complete a factory reset, do the following: 1. Disconnect the power supply from the Vocal 300. 2. Press and hold the SELECT button while connecting the power ...

..

Do you have a model number on a DigiTech?

http://www.instructables.com/id/Testing-batteries-with-multimeter/

http://digitech.com/en-US/products/rp300a

Digitech DIGITECH GSP5 Manual

HOW TO INSTALL DIGITECH SECURITY AUDIO DOORPHONE 2 TO 2

U.S and Canada: 20 VAC, 60 Hz Adapter: PS093B-20
Japan: 00 VAC, 50/60 Hz Adapter: PS093B-00
Europe: 230 VAC, 50 Hz Adapter: PS093B-230
UK: 240 VAC, 50 Hz Adapter: PS093B-240

Power adapter requirement straight from the user manual. I am sure you are aware that a simple plug adapter in a tourist shop does nothing to convert 120v US to 240v AUS. Note you unit does not like temperatures above 40C. And you can get that in Australia.

Bear in mind the timezone difference if you try Digitech support in the US.

DIGITECH VOCALIST LIVE 4 Owner Manual Page 36

Read your manuals for both pieces of gear carefully first. You only have one amp so you won't be able to take advantage of all the FX on the Digitech as a lot of them are designed for stereo. The Digitech manual shows guitar into the Digitech and output from the Digitech into input of any guitar amp. Since you have a Marshall and can already get some great sounds by running your guitar straight into the Marshalls input, you would probably be better off using your Digitech in the FX loop. Run a guitar cord out of the send on the loop into the input of the Digitech and a guitar cord out of the left / mono output jack on the Digitech into the effects return jack on the Marshall. Start out with the effects level on the Marshall all the way down. Do the same with the Digitech with both the input and output levels. (Read the manual carefully) I think the choice of the Digitech isn't that great because it is already trying to reproduce a lot of what you can already get with just your Marshall but with a little experimentation and some careful adjustments you should be able to add to the sound of the Marshall. Hope this helps.