My singer quantum xl 1000 is stitching in one place

SOURCE: The LCD Touch-Screen not working

Hi-

Chances are you need to reset the settings. check the guides as well for the correct setup.

Hope this helps

SOURCE: frozen machine

Hi this is techcrazy

the motors in ur sewing machine is not runnin because there is no proper rotational motion inside the motor of sewing machine.so one way of rectifyin is replacing the old pair of magnets with new ones..which may prove costly.so if possible my sincere advise is to go in for a new one

please do rate me on this solution

SOURCE: Button hole maker on Singer Quantum Futura CE-200

Try to adjust the stich width on the machine maybe it can help

SOURCE: How do you recalibrate the touch screen on the

Enter service mode....

Press the start/stop switch and hold it while you power the machine on.
THEN, press the reverse switch, hold it and press the lcd. Release the reverse switch AFTER you touch the LCD.

sweetearth20

• 1 Answer
• Posted on Sep 01, 2012

SOURCE: What do I need to connect my singer quantum

You will need a converter box that hooks up to a computer and writes to a card that fits into your sewing machine. Singer PSW 1,0 (box and card), OESD Magic Box (4 slot), and Amazing Designs Amazing box (also 4 slot) will do this. You will also have to make sure these boxes come with a blank card. Amazing Designs and OESD cards MAY be interchangeable. Not sure about the Singer card. In regards to the Singer Card--there are 2 types. Make sure the one you get is for the XL100 or XL1000. XL5000 on up is different. Singer, OESD, or Amazing Designs no longer support Singer XL100 so you will have to go to EBAY. These items are rare but they do pop up a few times a year. ALSO, the software only runs on Windows XP. Don't know if there is a patch, but there is a Yahoo group that deals with Singer XL100/1000. Good Luck