How do I change my fit bit it is a hour ahead

try this link.
change my fit bit it is hour ahead Google Search

no problem
when you get to your destination just set it to local time
Australia has the same 24 hours in a day time measurement as anywhere else

just reset the time as if the watch stopped
daylight time is not a special time just an hour earlier or later

You may need to remove the movement and have the hands reset by removing the hands a resetting them correctly

go to support page on casio. and get your manual. youll probably gonna look for a 3 or 4 digit number located at the back of your watch. once you got the manual. go to page 4. and follow the steps of "Hand Home Position Correction". that should fix it.

i also have ga 110c and i have encountered this issue

But the first notch, or first snap, is the secret and the key to setting the Day and Date! In the first notch position, you'll see that if you spin the Crown one way, it will change the Day. Spin it in the opposite direction and it changes the Date! Do keep in mind that you may have to spin the Day and Date a couple rotations because it most likely will alternate between English and Spanish. Just pick the correct Language for you and it's done! When the Day and Date are set, push the Stem in all the way and enjoy your Watch! If you still have the problem with your Watch changing Dates at Noon instead of Midnight, that just means you're on the wrong 12 hr cycle. (It's set for Twelve at Night instead of Twelve at Noon) All you need to do is pull the Stem all the way out, (second notch) and Spin the Minute and Hour hands ahead 12 hours. If it's Twelve O'Clock, spin it ahead until it's Twelve O'Clock again. Doing that will put the Watch on the correct 12 hour cycle. Granted, you may have to reset your Day and Date again since you just advanced it, but at least you'll be in the correct Time Zone! Happy Spinning! google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);

The watch is set-up for a 24 hour cycle. It sounds like your watch is 12 hours late, so if you just advance the time 12 hours ahead, everything should be solved.

From the time telling mode press the set button the seconds will flash.

Press the mode button the hours will flash

Press the adjust button to change the hours

Press the mode button the minutes will flash

Press the adjust button to change the minutes

Press the mode button the month will flash

Press the adjust button to change the month

Press the mode button the date flashes

Press the adjust button to change the date

Press the mode button the day flashes

Press the adjust button to change the day

Press the set button when done.

Press & hold set button the seconds will flash.

Press split/reset to set seconds to zero

Press mode to select hours

Press split reset to advance hour digits go through 12 hours to get to AM/PM

Press mode to select minutes


Press split reset to advance minutes

Keep repeatin the above steps to set month date day and 12/24 hour diplay

Press set when done.

The watch thinks at Noon it is really midnite, so you must scroll 12 hours ahead to repair this. There are usually 2 "clicks" on the stem of the watch when you pull it out, 1 will set time, 1 will set the day/date, be careful to pay close attention to which is happening when you pull out the stem, and setting should go well after that.