Range hood bulbs are blinking

check to make sure you have power back to the junction on the hood,sometimes just resetting the breaker wont do the trick,it may be a wire at the hook-up open now,there may be a fuse protecting the unit itself for the fan control,but the lights are usually wired direct so re-check the incoming power first

Contact Dave at

Metal Filters

Filter Factory TTN Inc

They mfg filters.

replace control...on going problem..

make sure the fan blade not touching anything. make sure are clean the grease sticking to the blades can make the fan go out of balance

most likely a bad socket. if it were bad wiring the problem may have occured somewhere else in the range..

Check manual. Fan has been on 30 hours. Reset counter by holding "-" for ~5 seconds.

On going problem...switch..replace

Power problem....controls ...on going replace

May be wiring ....at switch...reversed...polarity...or control replace..

On line....sound control board to me...