From what I have heard, the switch on these units can sometimes be defective. Also, looking closely at the the AC cord may help determine if there is damage to it that should be repaired.

Jan 08, 2016 | Shop Vac Vacuums

1 Answer

User manual for Genie 125HP wet/dry vac

try this link below
http://www.retrevo.com/search?q=Shop-Vac+9625510&st=20

Nov 12, 2015 | Shop Vac Vacuums

1 Answer

Where can I get a repair manual for a bosch powermax 1700w vacuum cleaner?

You won't likely find one anywhere. Bosch pulled the plug on vacuums several years ago. Take it to your local vac repair shop if you need repair. I'm not allowed on here to give you my store info as it's seen as self promotion, but do a search in your area for former Bosch vac dealers and you should be able to find a qualified expert near you.

Jan 08, 2015 | Bosch Vacuums

1 Answer

I have a Shop-Vac with a 6.5 HP electric motor. The vacuum power is lacking and I think it is the electric motor brushes. Looking for the brushes. The ones I took out have the number 848 stamped on...

you can get them off the link below
http://store.advancecarbon.com/prostores/servlet/Categories

Oct 20, 2012 | Shop-Vac Corporation Shop-Vac 9625410...

1 Answer

How do you change a belt on the Bissell 5770

you can get a free manual at manualsonline.com
I just looked up your vac on page 5 of their list of manuals. Or you can open up your vac and see how the belt is on there and then you will see how to do it --- or you can take it to a vac repair shop and get them to replace it for about $12-15.

Hope it helps.
Kris

Feb 24, 2012 | Bissell Vacuums

1 Answer

Looking for the manual for 11.5 ultra as I can not find mine

Shop Vacs have a general manual that's good for most of their models.
There's a 962-12-10 listed on the following site, Twelth row down, the last one under Professional Series.

Feb 28, 2011 | Shop Vac 962-12-00 Ultra Pro Wet/Dry...

2 Answers

I have a shop vac. model 500x 1h.p. Center section speratedon impeller cost of new ? or throw away ?

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=794495
Generic problem for all Vacuums
I have a shop vac.
Posted by mymino on Jul 17, 2008
I have a shop vac. model 500x 1h.p. Center section separation impeller cost of new? Or throw away?
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. There are only 2 ways that I can think of in answer to your question. Either you can replace the fan impeller or you have to replace the entire motor. You would have to contact your local vacuum cleaner dealer in your area or contact the Shop Vac factory @ the website or to call the factory @ the phone 3 listed below; or check your owner’s manual.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://shopvac.com/contact.asp
Customer Service 570-326-0502 Phone #
Customer Service 570-326-7185 Fax #
Shop-Vac Corporation
2323 Reach Road
P.O. Box 3307
Williamsport, PA 17701
Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 17, 2008 | Kenmore Progressive Bagless Upright with...

1 Answer

Old red and black Genie Shop Vac

http://geeksquad.fixya.com/ThreadView.aspx?prdid=19255&thid=659916
Old red and black Genie Shop Vac
Posted by girl power on Jun 10, 2008
A Wheel or disk has come off of the motor. I would like to get a copy of the user manual to see if I can determine where it came off of. This Genie Shop Vac was given to us from my father-in-law.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check with the manufacturer Shop Vac to get an owner’s manual for the older Genie Shop Vac would be @ the Shop Vac Website and or Customer Service of which I will give you @ the bottom of the response. Other wise check with your local vac dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://shopvac.com/contact.asp Customer Service 570-326-0502 Phone #
Shop-Vac Corporation Customer Service 570-326-7185 Fax #
2323 Reach Road
P.O. Box 3307
Williamsport, PA 17701
Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 10, 2008 | Shop Vac 584-06-00 Canister Wet/Dry Vacuum

2 Answers

Need an owner's manual on line

http://geeksquad.fixya.com/ThreadView.aspx?prdid=19255&thid=658668
Need an owner's manual on line
Posted by LinJay on Jun 09, 2008
I have lost my owner's manual for my shop vac and need to figure out how to set it up so I can pump out my flooded basement using a garden hose.
Is there anywhere I can find an owner's manual on line??
The model stated on my vac is not what I clicked on your site....my vac states:
Model QPV 10.5

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. I am supplying you with the contact for the Shop Vac Factory Service for owner’s manuals listed below: for the website and the customer service line, but make sure you include the Shop Vac Model # and the Serial # as well. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://shopvac.com/contact.asp Customer Service 570-326-0502 Phone #
Shop-Vac Corporation Customer Service 570-326-7185 Fax #
2323 Reach Road
P.O. Box 3307
Williamsport, PA 17701
Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 09, 2008 | Shop Vac 584-06-00 Canister Wet/Dry Vacuum

Not finding what you are looking for?

View Most Popular

Vacuums

Install motor in Shop Vac model 16E 650c

Shop Vac Vacuums

Open Questions:

0 Answers

i need the fan for the QSP shop vac

Jul 26, 2019 | Shop Vac Vacuums

0 Answers

My Genie Medallion 25 gallon 5 HP Wet Dry shop vac has 3 plastic locking clamps holding the motor to the body of the vacuum. Any idea where I can buy replacements as two have broke?

May 14, 2019 | Shop Vac Vacuums

0 Answers

remove motor shop vac 800m

Dec 15, 2018 | Shop Vac Vacuums

0 Answers

a replacement impeller for a shop vac 90LN650C?

Aug 01, 2018 | Shop Vac Vacuums

Ask a Question

Usually answered in minutes!

Have a manual for Shop Vac Vacuums? Or just drag it here!

Looking for repair manual Shop Vac 16E 650c - Shop Vac Vacuums

Add Your Answer

Attachments: Added items

Related Questions:

Install motor in Shop Vac model 16E 650c

Our BLB500, 12 gallon, 5.0 peak HP, Shop Vac won't come on.

User manual for Genie 125HP wet/dry vac

Where can I get a repair manual for a bosch powermax 1700w vacuum cleaner?

I have a Shop-Vac with a 6.5 HP electric motor. The vacuum power is lacking and I think it is the electric motor brushes. Looking for the brushes. The ones I took out have the number 848 stamped on...

How do you change a belt on the Bissell 5770

Looking for the manual for 11.5 ultra as I can not find mine

I have a shop vac. model 500x 1h.p. Center section speratedon impeller cost of new ? or throw away ?

Old red and black Genie Shop Vac

Need an owner's manual on line

Not finding what you are looking for?

Vacuums

Install motor in Shop Vac model 16E 650c

Open Questions:

i need the fan for the QSP shop vac

My Genie Medallion 25 gallon 5 HP Wet Dry shop vac has 3 plastic locking clamps holding the motor to the body of the vacuum. Any idea where I can buy replacements as two have broke?

remove motor shop vac 800m

a replacement impeller for a shop vac 90LN650C?

Related Topics:

Ask a Question

Check out the Latest Vacuums Report

Top Shop Vac Vacuums Experts

Mike

jdthefixer

Bill Johnson

Are you a Shop Vac Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

ShopVac-General-User-Manual.pdf....

Looking for repair manual Shop Vac 16E 650c - Shop Vac Vacuums

Add Your Answer

Attachments: Added items

Related Questions:

Install motor in Shop Vac model 16E 650c

Our BLB500, 12 gallon, 5.0 peak HP, Shop Vac won't come on.

User manual for Genie 125HP wet/dry vac

Where can I get a repair manual for a bosch powermax 1700w vacuum cleaner?

I have a Shop-Vac with a 6.5 HP electric motor. The vacuum power is lacking and I think it is the electric motor brushes. Looking for the brushes. The ones I took out have the number 848 stamped on...

How do you change a belt on the Bissell 5770

Looking for the manual for 11.5 ultra as I can not find mine

I have a shop vac. model 500x 1h.p. Center section speratedon impeller cost of new ? or throw away ?

Old red and black Genie Shop Vac

Need an owner's manual on line

Not finding what you are looking for?

Vacuums

Install motor in Shop Vac model 16E 650c

Open Questions:

i need the fan for the QSP shop vac

My Genie Medallion 25 gallon 5 HP Wet Dry shop vac has 3 plastic locking clamps holding the motor to the body of the vacuum. Any idea where I can buy replacements as two have broke?

remove motor shop vac 800m

a replacement impeller for a shop vac 90LN650C?

Related Topics:

Ask a Question

Popular Questions

Old red and black Genie Shop Vac

Shop vac 90L400 stopped working won't start

Need an owner's manual on line

Set up the shop vac to pick up water

Shop Vac 12 wet dry canister

Check out the Latest Vacuums Report

Top Shop Vac Vacuums Experts

Mike

jdthefixer

Bill Johnson

Are you a Shop Vac Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

ShopVac-General-User-Manual.pdf....