The model is MER5770AAB, Serial #13146904U.S. Maytag electric range. We bought our home with this appliance already installed....to only find out there isn't a manual left with it...and we cannot seem to figure out how to bake in the oven...I even went to the maytag site but they don't even show this model number...I am desperate to figure out how to bake in my stove...any help you can give would be greatly appreciated....turkey day is fast approaching!!!
Hi, try this and see if will help you. Most of the Gemini models are the same.
To set Bake:
1. Press the Bake pad.
• BAKE will flash.
• 000 will flash in the display.
2. Select the oven temperature. Press the
Autoset 0 pad for 350° F or the appropriate
• Each additional press of the Autoset 0 pad will increase
the temperature by 25 degrees.
• The oven temperature can be set from 170° to 550°.
3. Press Bake pad again or wait four seconds.
• BAKE will stop flashing and light in the display.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Locate your serial number. It will be located on the same nameplate as the model number. On most Maytag appliances, this information can be found on the back of the operator control panel. If not located there, look around the oven door or lower drawer opening.
The two LETTERS at the end of the serial number represent the date of manufacture. The FIRST letter represents the YEAR, while the SECOND letter represents the MONTH.
If you have questions, please post back and let me know. I hope you find this information helpful.
This is bad ERC (electronic range control) on this unit. We are Maytag factory authorized service and parts suppliers, so call us and we will send part removal/installation instructions when you purchase your parts through us.
We are available from 7 AM until 7 PM CST so call us whe you are ready to get this stove cooking a delicious, hot home cooked meal again.
Contact us at :
We look forward to working with you. Thanks, Ella
http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=573616 Generic problem for all Kitchen Ranges I would like to clean Posted by kenirons on May 05, 2008 I would like to clean my Maytag self cleaning oven but have lost the book with the directions. Please give me the steps. Thank you Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR APPLIANCE before beginning any service procedure. You would have to contact the Maytag factory for a new owner’s manual and make sure you give them your model # and serial # in order to get the right one, I have listed some information below for your convenience. There are new products in the market that do clean self cleaning ovens that do NOT harm the actual self cleaning process, but check with the factory so that it does not void your factory warranty. So if you need further assistance, please feel free to contact your local appliance dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. http://maytag.com/home.jsp Contact Us Call M-F from 8am-8pm Local Market Time Sat 8:30am-5pm Local Market Time Please locate the appliance's model and serial number before calling. For Manuals and Literature, Use the Email Format in the Website Lookup model & serial # (866) 616-2601 U.S. (800) 688-2002 Canada By Mail Kitchen, Laundry Appliances and Water Heaters Maytag Customer Service 553 Benson Road Benton Harbor, MI 49022 Thanks,Don – The Appliance Man Go Ahead.Use Us.