I have an bang oloufsen avanti 85 and the New Tivo Box but im not get IT working With remote, I setup the Tivo Box with an remote extender, select Tivo (all modell) . But is not working!

SOURCE: TIVO Remote Control Problem

A similar problem happend to me. Buying a new remote fixed it - for about three weeks.

Maybe your new one will work longer.

SOURCE: Need code for Brookstone remote to work W/ Direct TV TIVO receiv

Sense you do not know the make of the receiver I would do a code search. This is how you do it.

Automatic Programming
With automatic programming, the remote control tests all the codes available
on the Code List and assigns the correct code for the selected device.
Although this method can be more time-consuming, it eliminates the need to
look up codes and enter them manually.
1. T urn off the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. The
remote control is in programming mode.
3. Press and release . The POWER INDICATOR flashes once and stays on
indicating the unit is in Power Scan mode.
4. Press CHANNEL + or CHANNEL - repeatedly until the device turns on.
5. When the device turns on, press OK to store the code.
Note:
• To exit without storing the code, press BACK.
• The unit will search for the next code or the previous code if you press
CHANNEL + or CHANNEL - after the device turns on.
6. Press any other button. If the device responds, the remote control has been
programmed. If the device does not respond, repeat steps 2-5.

Good Luck and Please Rate FixYa!

SOURCE: Tivo DirecTV Remote-Program AKAI LCT2721AD

Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).

Dana Newcombe

• 1564 Answers
• Posted on Jul 25, 2009

SOURCE: the remote quit working. The tivo box works ok,

I hope the tivo is still under warranty, it sounds like it's time to call them, sorry I couldn't be of better assistance.

SOURCE: I need the remote (RC23) code for a series 2 Tivo Model TCD54008

if the remote is RC23, the tivo codes are 01442 & 01142. If you actually have a Rc16, then you can only control the tivo partially with code 20618 on either AV1 or AV2 device slots.