Can I pair my Bluetooth earphones to my iPad?

It is very unlikely that your MP3 player is BlueTooth. Make and Model or the player and the earphones are needed in questions like these or we are working blind and guessing. Click COMMENT to report back. Read this though.

Tip & How-To about Miscellaneous

Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognizes it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).

Posted by ADMIN... on Nov 19, 2016

Check with manufacturer to see if iPad is comparable and troubleshooting assistance

Headphone is easy to pair to most Smart Phones and Bluetooth-enabled Tablet.
You can wear the earphone while you're running or working out, and do not have to stick your iPhone in pocket.
make you enjoy the exercise.
Turning on:
Press and hold MFB for 4 seconds until blue LED flashes.
Turning off:
Press and hold MFB button about 4 seconds until red LED flashes. Amazon com Bluetooth Headphone Charm sonic for Gym Runing Exercise Sports...

If they are Bluetooth earphones, you simply pair them together. On the earphones, to put them in pairing mode, you usually press and hold on button for 5 seconds. Then put iphone into Bluetooth discovery mode. Settings>bluetooth. The device will show up, then click to pair. If it ask for a code, it is usually a default of 0000.

Hi Douglas.

1. Switch on BlueTooth on your keyboard.
2. Enable BlueTooth on your iPad.
3. Search for devices on your iPad.
4. Press button if available on keyboard to get discovered.
5. Select keyboard when shown in devices list.
6. Enter pairing code sometimes 0000 or 1234.
7. Use and enjoy.

Hope this helps!

Here is the Apple site instructions:
Using Bluetooth headsets and keyboards with iPad

Here is another that explains how to do it on a MAC, might give you some clues as well:
Bluetooth How to set up your Apple Wireless Keyboard

Here is a good independent site, maybe start here:
iPad How to pair connect any bluetooth keyboard

If you prefer to watch how to do it on YouTube:
How to Connect Pair Bluetooth Wireless Keyboard to your iPad

The speaker has to be paired with your iPad before it will work. Check your documentation on how to put your speaker in "discoverable" mode long enough for the iPad to find it. If you have previously paired your speaker and it at one time did function is your iPad, make sure that Bluetooth is turned on on the iPad. Also, check the batteries on the speaker if it has previously functioned with your iPad...

You will need to enable bluetooth on your iPad and then pair the keyboard to the iPad. Try the following:

• On your iPad, tap the settings icon from the Home Screen.
• Tap on General.
• Tap on Bluetooth.
• Toggle Bluetooth to On
• Turn on the Belkin keyboard.
• The keyboard will show up under Devices on the iPad.
  Select Belkin Bluetooth Keyboard.
• A code will appear on the screen.
  Enter this code on the keyboard and click Enter.

A message will pop up when pairing is successful. If pairing fails, repeat the steps above. If you're still unable to pair the two leave a comment and I will help further troubleshoot.

Hope that helps!

Among the convenient features of the Apple iPad is the ability to pair the iPad with Bluetooth devices.

Bluetooth devices allow the iPad to interact with wireless accessories including headsets and keyboards.

Like most things related to the iPad, connecting an iPad to a Bluetooth device a quick process.

Refer to the device's instruction manual for directions to make the Bluetooth device discoverable.

Typically, this involves holding down a button for a few seconds.

To pair an iPad and a Bluetooth device, the Bluetooth device must be discoverable.

Turn the iPad's Bluetooth capability on.

Go to the settings menu on the iPad by tapping the "Settings" icon on the iPad home screen.

Tap "General" from the left panel and then "Bluetooth."

Once you are in the Bluetooth screen, slide the "On/Off" switch to "On" to turn on Bluetooth.

Select the device you wish to pair with the iPad from the list of discoverable Bluetooth devices that appears on the screen.

Depending on the device, a password may be required.

Refer to the Bluetooth device's product manual for this password.

Hope this helps.

Hi, this instructions works on some iPads, you can try it on yours.

How to Pair A Bluetooth Device With The iPad

Among the many convenient features of the Apple iPad, the ability to pair the iPad to any Bluetooth device is very convenient.

Bluetooth devices allow your iPad to interact with devices ranging from headsets to computers without the use of wires.

Like most things related to the iPad, connecting an iPad to a Bluetooth device is easy. Follow these simple steps to do so.

Instructions


Things You'll Need:

* iPad
* Bluetooth Device (headset or other)



First, in order to pair the iPad to a Bluetooth device you need to make sure the Bluetooth device is discoverable. Refer to the instruction manual for the device (which you can find online usually if you lost it) on how to do this.

Typically, it just involves holding down a button for a few seconds.


Next, you need to turn the iPad's Bluetooth capability on. Go to Settings by touching the Settings App icon that looks like gears.


Within Settings, select General and then Bluetooth. Once you are in the Bluetooth screen, press the on/off switch to turn Bluetooth on. Make sure it reads "on".


Once you turn on Bluetooth, you should see the discoverable Bluetooth device show up on the screen as part of a list. Select the device you wish to pair with the iPad.

Depending on the device, it may prompt you for a password. Refer to the Bluetooth device's product manual for this password.



Tips & Warnings


A white Bluetooth icon on the top of the screen indicates a device is connected to the iPad

A gray Bluetooth icon on the top of the screen indicates Bluetooth is on but no device is connected.

hello, i have a philips wireless head set and this how i set mine up, i take it you've got the sensor with long black wire attach to it this plugs into your earphone socket on your tv set then plug the power adaptor the sensor switch on make sure the sensor pointing towards you and put the batterys into the earphones and switch earphones on you should have sound get back to if you have trouble thanks

regards
shaun