- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have blocked the print head nozzles. If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer thanreplace the print head.
you have a switch problem that needs to be fixed ASAP, you can go to either makitausa.com and type in your model number or to ereplacementparts.com for a replacement switch. If you have a local repair center they usually have them also. MAKE note of the wiring before removing the switch. Let me know if you need more assistance.
At home, we mostly use Printmaster for making greeting cards, but I'm guessing the procedure is similar. When you complete one design, select Finish Project, or similar. Then there's a menu option to Save the project. Give it a name, then Save.
Next, begin a new project, this time choosing the next image. This will prove to be a tedious effort, but you need to Finish and Save each one as a separate project. Of course, once it's done you can simply choose any one of them from your Open Saved Project list and quickly make any needed changes, then print.
I use Dual Undersill Trim Secures trimmed siding panels under windows and eaves regardless of the profile or where in the panel face the panel has been trimmed . I also would suggest purchasing a Vinyl Siding Snap Lock Punch is a hand held crimper that puts a crimp into the upper
cut edge of a vinyl siding panel. When the panel is inserted into a
vinyl sill trim it locks in and won't fall out They cost about 18-24 dollars.
Hope this answers all your questions Please remember to Rate/vote for any solution that helps you out. Thanks for using Fixya.
Why not try a free alternative - it will take a bit of effort to learn new software, but Mozilla's Sea Monkey Suite is a combination browser and Web-page composer. It is fairly easy to use and quite sophisticated for everyday work:
Here is another alternative which I am unfamiar with: http://kompozer.net/download.php
There are others - google "Free Dreamweaver Alternatives" . BTW I do not recommend Dreamweaver for a newbies casual work it is quite difficult and has too many buggy functions.
this sounds totaly stupid, but I just have been dealing with this exact same issue for the last 3 hours- the resoultion? I took off the stitch finger and it started working perfect! I don't understand why this fixed my problem but in a crunch works great! Perfect even stiches and blades cutting evenly as well.
the inverter maybe going bad. go to ebay get a cheap toshiba satellite a105 lcd inverter.bam the problem fix oh you would need a screw drivercause this is a diy project no need tosend it out link me if anything [email protected]