At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Staples shredder model spl NMC 100FA is not working. We do not use it very often. We pushed papers into the auto feed and nothing happened. It does have power
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This appears to be a shredder rather than a Car and Trucks issue. I have moved you to the correct category and edited your question for clarity.
Remove the head and vacuum all the dust and paper bits, top and bottom. There is a sensor in there that is looking for a sheet of paper. When you turn it on, it thinks it has found it. While you are at it, oil the blades.
Unfortunately, not a solution. I have the same problem and am looking for advice. I removed the bottom and verified the switch works, which it does. No lights go on when it is turned on. When it is in reverse, I can push a small lever on the bottom and it runs. Maybe I can feed the papers from the bottom. The lever on the bottom is a small raised black support with a tan bar inside which is what I press to get it to run. It does nothing in forward. Any advice is appreciated.
There is a small micro switch in the slot where you insert the paper, have a look and find it, it may be jammed with a piece of paper or bend. Wd40 might help
×