Question about Sony VPL-ES7 LCD Projector
Check the fan connections, one might not be connected right if you have just serviced it. Switching off with a flashing red light usually indicates a fan error.
Also is there a sequence to the flashes? e.g, 4 flashes and pause?
some manufacturers have a fault code table for the amount of flashes.
Posted on Nov 17, 2016
According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:
The above sequence should clear the counter.
Posted on Apr 09, 2009
Possible that the lamp is faulty -if the hours have elapsed- check the lamp holder, the fitments.
check also the filters, clean and reset.
Make sure the power supply Unit is not having any poor soldering or faulty components to reduce the voltage output to the lamp thus making it shut down..
Posted on Jan 17, 2011
A Flashing Red ON/STANDBY LED means one of the following
2 Flashes - The internal temprature is high. Check the air holes are unobstructed.
4 Flashes - The fan is broken
6 Flashes - The internal electrical system has failed.
There is no entry in the manual for 12 red flashes.
Posted on Feb 19, 2011
Tips for a great answer:
Jul 08, 2016 | Sony VPL-VW95ES Full HD 3D Home Cinema...
Jun 29, 2015 | Sony VPL ES7 SVGA 800 x 600 LCD projector...
Jun 23, 2015 | Sony VPL-ES4 Projector
Jan 28, 2015 | Sony Bravia® VPL-AW10 Projector
Sep 04, 2014 | Sony VPL-ES7 LCD Projector
Feb 19, 2011 | Sony VPL-FX40 Projector
Dec 20, 2010 | Sony Projector Lamp for VPL-HS51
674 people viewed this question
Usually answered in minutes!