I have canon iR2022 someone help me for setting A4 paper.when i m printing its taking A3 by itself.

question edited for clarity and toss in some CAPS.

It doesn't take A3 Paper and doesn't have a Tray No. 4.
A4R is just A4 in Landscape Mode, half an A3.

What is A4 and A4R?
The "R" indicates that the paper is set in the landscape orientation. Paper that can be set either in the portrait or landscape orientation. Paper that can only be set in the landscape orientation. 8-1/2" × 11" A4, B5. 12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" × 13", A3W, A3, B4.
Tray Capacity No-collate Mode Tray A: 250 Sheets (Letter, Statement-R, Executive) 125 Sheets (Legal, Letter-R, 11" x 17")

Tray B: 1,300 Sheets (Letter, Statement-R, Executive) 650 Sheets (Legal, Letter-R, 11" x 17") Tray C: 2,450 Sheets (Letter, Executive) 1,700 Sheets (Statement-R) 650 Sheets (Legal, Letter-R, 11" x 17") Collate and Group Mode Tray B: 1,300 Sheets (Letter, Executive) 650 Sheets (Legal, Letter-R, 11" x 17")

Tray C: 1,700 Sheets (Letter, Executive) 650 Sheets (Legal, Letter-R, 11" x 17")

Staple Mode Tray B/C: 1,300 Sheets/100 Sets (Letter, Executive) 650 Sheets/

https://copiersonsale.com/wp-content/uploads/brochures/Canon-imageRUNNER-6570-Brochure.pdf

https://www.google.com/search?q=canon+ir6570+paper+size

Changing Tray Size Settings

https://www.google.com/search?q=canon+ir6570+change+paper+tray+size

..

please check page set up and put paper properly on the tray

hi

your printer is A4 Size printer it will not print A3 size

if you fill to print A3 go to HP site and support page find your solution

The following are the max printable areas for the Canon i9950.
A3+, A3, Ledger, B4, A4, B5, A5, 5" x 7", 4" x 6" Size
Printable Area (width x height)
A3+ (13" x 19")
322.2 x 475.0 mm / 12.7 x 18.7 in
A3
290.2 x 412.0 mm / 11.4 x 16.2 in
Ledger (11" x 17")
272.6 x 423.8 mm / 10.7 x 16.7 in
B4
250.2 x 356.0 mm / 9.9 x 14.0 in
A4
203.2 x 289.0 mm / 8.0 x 11.4 in
B5
175.2 x 249.0 mm / 6.9 x 9.8 in
A5
141.2 x 202.0 mm / 5.6 x 7.9 in
5" x 7" / 127.0 x 177.8 mm
120.2 x 169.8 mm / 4.7 x 6.7 in
4" x 6" / 101.6 x 152.4 mm
94.8 x 144.4 mm / 3.7 x 5.7 in


Borderless printing will allow you to print up to the full size of the paper but no larger than 297 x 420mm for A3 and 330 x 482 mm for A3+.

It is not possible to print on A2 paper.

if it hapen´s just after you acces it via web and if you turn it off and back on everything get´s right your problem is the firmware.if it´s your problem call me back.

Have you set up the page as A3? If so, should be ok if you set the printer paper size to A3. If you set up the page on A4 you will need to tell the the printer to 'scale to A3' and it's best to say you want to preview before printing

Try to flip the A3 paper (in your paper drower), it may be if it isnt used so often it can be moisty, so when it pass the fixing roller, he bacames undulate.

Or if A4 is ok, that means that sorter does not work OK, because the A3 is longer and it pass longer way and more rollers.

From the Printers & Faxes window, check in the i9950 Printing Preferences, Page Setup tab, for the following settings:

Page Size and Printer Paper Size are both set for the same size (both A4 or both A3).
Printing Type is set for Normal-size Printing

The graphic on the left should now show A4 (or A3) and Normal-size Printing in the legend.

Once that is set, verify from the application you're printing from that these settings are not being changed by the application (Preferences button in the print dialog box).

Set your paper size to A3 - it should print out the docs on two seperate sheets of A4.

Put A3 in the paper tray and select reduce and enlarge and set to 141% this is A4 up to A3 then press start this should help.

Thanks J