Question about Riccar Vacuums

Open Question

How to remove the top cover on a riccar 1800 to change the fuse

Posted by James Adams on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My belt came off my Riccar Radiance when I took the brush out to clean the hair off, how do I get the belt back on

The belt has to go around the motor shaft then under the roller on the pivoting lever (it's called the hall sensor) then around the brush roll. It may be easier to remove the top cover of the nozzle housing by removing the 5 screws from the bottom of the vacuum.

Feb 21, 2017 | Riccar Vacuums

1 Answer

What size replacement belt for riccar 1700 vacuum

You need to contact your local Riccar dealer. They are not available except from Riccar dealers.

May 30, 2014 | Riccar 3623210300 RC 1700, 1800 Full Size...

1 Answer

Why does my riccar supralite vacuum makes a loud rattling noise like the roller is banging around?

You have something wrong with your brush roll or you have damaged the fan. Remove the brush roll and belt and turn the vacuum back on, if the noise is gone it is likely something wrong with your brush roll, if the noise persists you probably have a broken fan. You have to remove the motor and fan housing after removing the top cover, unscrew the bolt holding the fan on and install a new fan (you can get one from any Riccar or Simplicity vacuum dealer)

May 15, 2014 | Riccar Vacuums

1 Answer

How do i replace a hepa filter for riccar 8955?

Recline the handle backward. There are two little catches on the filter cover, pull them to remove the cover. Remove the filter and replace.

Apr 27, 2014 | Riccar 8955 Upright Vacuum

1 Answer

Replace power cord on riccar 8955

Remove the bag door cover, remove the screws holding the cover over the switch and wires coming into the body of the vacuum. Remove two screws holding the cord in place, unhook the old cord and install the new one the same way the old on was

Apr 14, 2014 | Riccar 8955 Upright Vacuum

1 Answer

Accessing the motor on a riccar radiance

On a Radiance you will need to remove the screws going through the bottom of the vacuum nozzle housing which hold the cover on. Remove the cover and remove the screws holding the cover that goes from the brush roll to the lower motor. When you remove this cover tpyou will be able to see into the fan of the lower direct air motor to remove the obstruction. If it is in too far. You may have to pull the motorand open up the fan. This is not a hard thing to do but. If you have never done it, it can be a confusing job that may be best left to your Riccar dealer.

Mar 05, 2014 | Riccar 8955 Upright Vacuum

1 Answer

How to replace the hepa filter on a riccar vacuum # 8995

Remove the filter cover by releasing the two latches. If it's been a long time since you've removed the cover it may be difficult to get the filter to release. The filter should be changed once per year for the average homeowner

Feb 15, 2012 | Riccar 8955 Upright Vacuum

1 Answer

Riccar 2150 (1992 year)

Fixya cannot supply Riccar vacuum parts.

Jan 22, 2018 | Riccar Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riccar Vacuums Experts

brian kossman

Level 1 Expert

66 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you a Riccar Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides