I have a bush DVD t2 pvr mpeg4 can you have different channels than bbc

Contact manufacture

Dear Anonymous,
Here is a link to the manual, you will find the support number there.
Give them a call. Good luck,
JP
https://www.manualslib.com/manual/1201859/Bush-Dvb-T2-Pvr.html

Click the link and download the manual:
http://documents.4rgos.it/v1/static/5423448_R_D001

If this is a DVR then check with weeknees( not sure of spelling), they rebuild dvrs and there is a special type format,not sure what it is.

Free User Manuals and Owners Guides ManualsOnline com

Different digital boxes and tv's have different levels of RF gain. Some need more signal and some need less to work efficiently.
Possibly your Bush pvr needs a much stronger signal than your tv so the available signal is permanently on the threshold of reception and atmospheric conditions will some of the time reduce the available signal when reception will become impossible for the box but still be above the threshold for the tv set.

Modern Bush is not reknown for being a high quality brand and the purchasers of budget brand pvr's often discover reception or performance problems in fringe signal areas. Because a single aerial must receive a very wide range of frequencies it will be more efficient for some channels than others and so one channel could be a fringe channel and another channel produce a very strong frequency.

The signal strength and quality can be checked for each channel by selecting options in the menu in order to check this theory.

The problem might be solved by replacing the Bush pvr with a premium brand or replacing your aerial for a more efficient type. One of my friends had five different boxes before he gained a satisfactory performance and another friend three boxes and still has problems.
My installation has a new high gain wideband aerial on top of my 3 storey house and a distribution amplifier in the loft to keep the input lead short and the whole lot connected by very good quality double-wrapped co-ax.
I had to add different amounts of attenuation for each box or tv set but in spite of the signal being on average too strong and needing attenuating there are still channels for which the aerial is not as efficient and providing only a weak signal.

Not a complete solution but after much fruitless fiddling through the menu I eventually found that the programmes were actually there but under different channel numbers.
I searched a long way down the LIST of channels (on remote) The BBC1 channel I want is now 800 BBC. Selecting 1 on the remote still brings up BBC Wales.
This applies to my Humax 8000T PVR - I can't comment on other makes of Freeview box.

Your question is posted under the heading Sagem PVR 6280 so I'll assume that's the model which you have.

The Sagem PVR 6280 is specifically listed as a model which will have problems with the retune.

Seethe address below for a chart of affected models, but the officialadvice is that you must contact Sagem directly on 0845 0900 316 foreither an over the air update or an update DVD depending upon themanufacturer.

http://news.bbc.co.uk/1/shared/bsp/hi/pdfs/01_10_09_freeview2.pdf

SorryI can't provide you with a definite solution but I hope that I've atleast reassured you that it's not something which you have or haven'tdone!

Please return the favour by rating my answer.

The Sagem PVR 6280 is specifically listed as a model which will have problems with the retune. Although the Sagem PVR 6200 and 6200t are not specifically listed as problem models they are very closely related to the 6280/6240 models and share most of the same firmware and software.

See the address below for a chart of affected models, you'll need to contact Sagem directly on 0845 0900 316 for either an over the air update or an update DVD depending upon the manufacturer.

http://news.bbc.co.uk/1/shared/bsp/hi/pdfs/01_10_09_freeview2.pdf

Sorry I can't provide you with a definite solution but it's very likely that your model is one of those which only Sagem can sort out.

Please return the favour by rating my answer.

The PVR h140 works on mpeg1 or mpeg4 format. If you need to convert avi files for example you will need a third party conversion programme such as Nero7 or similair free programmes. Check here for a 'how to' page. http://www.sharewareguide.net/article/Guide/guide:how-to-convert-video-to-mpeg4,-such-as-avi-to-mpeg4,-mpeg-to-mpeg4-and-vob-to-mpeg4-with-this-mpeg4-converter.html