I have a refurbished 1956 morse ziz zag beige and lower blue color. how do i wind a bobbin

For sale online:

https://manualsoncd.com/product/morse-zig-zag-sewing-machine-manual-fotomatic/


Morse Zig Zag Sewing Machine Manual Fotomatic

Try this site:

Morse Sewing Machine Instruction Manuals and Repair Manuals

You may even send them a photo of your machine to find out what model it is.

...

try these links

Morse Push Button Zig Zag Fotomatic Instruction Manual


Morse Sewing Machine Instruction Manuals and Repair Manuals


http://www.mastersewusa.com/info_morse_push_button_zigzag.html

manual for a vintage Morse 550 zig-zag Kathleen, Check the attached links,manuals and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Morse 550 zig zag manual Google Search
Morse 4300 Zig Zag Sewing Machine Instruction Manual Fotomatic III
Morse Pushbutton ZigZag Sewing Machine Threading Diagram
http://www.sewusa.com/Sewing_Machine_Manuals/Morse_Sewing_Machines.htm

The bobbin thread is being pulled too hard by the top thread. The idea is to get an even pull similar to a tug of war. When it is even the thread will form a knot in the middle of the fabric.
To fix this so the top thread isn't pulling too hard lower the tension of the top thread. This should fix it.

Oil what you can according to your instructions. Open top and use canned air. Bobbin area also..

try moving it with the stitch width set to #1

the gear or cam inside the sewing machine could be worn or broken, it would be a good idea to have the sewing machine checked at a repair shop.

I would try a metal bobbin, SA 156 or a Singer 15j. The SA 156 metal bobbins can be bought really cheap on ebay for $8.99 free shipping and there are 20 in the package. My 3116 sometimes will act up with the plastic bobbins and this cleared it up for me. Hope this helps you. You may be able to find the bobbins local because it is the same one they use in Brother machines but they will cost you more. Good luck

This could be more than one issue, first I don't think you have the machine threaded correctly. Make sure when you thread that the thread is seated betweeen the tension disc on the top and also, make sure that you have properly but tin the bobin