How do I cancel delay start on a Samsung dishwasher

Hi, push the cancel button and then turn off. Turn back on should be good. Here is the link to the user manual page 11 is the delay button.

Shut door, select cycle and options, press start.

this is not from me but i found it and am passing on..
Hi


Thanks for using FixYa. Error code 4h means 4 hour delay start which means that the dishwasher is in delay start mode and has been set to 4 hours. You can either wait for 4 hrs or to start it immediately press the cancel button to cancel the delay start option. After this program the cycle and options and press Start again as the dishwasher will not start the wash until it reaches the delayed hour i.e. till 4hrs. If after 4 hrs still the light blinks and it wont start then you'll have to replace the control panel. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Hello Laurent.

My name is Peter. I am a retired field service appliance technician.

I need your model number to help you. It is either on the face of the dishwasher after you open the door or on the side of the door.

In the meantime, turn power to your dishwasher at the breaker box. Wait 20 minutes for your dishwasher circuit system to shut down, then turn the power back on. What we are trying to do is reboot your dishwasher like you would your computer.

You may have to set your delayed start because you have not completed the time setting?

You may have to put the dishwasher on start and just wait until it starts.

I 'am not sure because I do not have your model number.

Press the key to set the delay start time.This dishwasher can be delayed to start for 1 to 24 hours,and the display window beside the delay key can indicate the remaining time. If you want to cancel the delay start, just press the delay key to make the remaining time become 0.


Dado

Hi and welcome to FixYa. I am Kelly. The 4H is indicating your dishwasher is in the delayed wash start mode. Here is some information from Sears about what to do:

• The number letter combination indicates that the dishwasher is in a "Delay Start" mode, as well as how many hours were set for the delay start.
• The dishwasher will not start the wash until it reaches the delayed hour that it was set for. Example: 1H = 1 hour delay start, 2H = 2 hour delay start, etc.
  • To start the dishwasher immediately and not wait for the Delay Start time, cancel the "Delay Start" option, by pressing the Cancel button. Then program the cycle and options and press Start.
  • To start the dishwasher after the Delay time, select the cycle and options desired. Select the "Delay Start" option and on some dishwashers it requires, pressing the Start button.
  • Some dishwashers will display a countdown of the delay time on the display.

Note: Refer to the Owner's Manual or Use & Care Guide for specific instructions on using the "Delay Start" feature.

If you need more assistance we will need your exact model number in any of your future responses.
Thanks for choosing FixYa,
Kelly

It is in a delay wash mode.
Disconnect power for 60 seconds.
Re-connect power.
Press the Cancel button.
Press the regular wash cycle and start the dw.

1. To cancel the delay.press the delay pad again when the delay is counting down. The indicator light will go out and the cycle will start or resume immediately.
2. To cancel the delay and the cycle, press Start/cancel once to drain and turn-off the dishwasher.
3. Press Start/cancel twice to turn-off the dishwasher without draining.
   

you hold in the start button untill it goes off