Kole audio amplifier manual needed kx2-980 - Kole audio Car Audio & Video

be sure the master volume is in minimum some amplifier has protect circuit when the volume exceed the maximum sound level to protect circuits from damage. try to disconnect speakers maybe one of them are shorted already

goodday maybe the power output ic is defective causing the caps blown. just replace it.

make sure that the fuse under the hood is the right amp and that your ground is secure and solid

depends on the size of your amplifier. what size is it? and how many channels? and what class?

This seems to be a legacy unit and no longer made. I was unable to find one on ebay but check here:

http://shop.ebay.com/i.html?_nkw=kole+audio&_sacat=0&_trksid=m270&_odkw=kole+audio+q2&_osacat=0

check RCA cables..if not that, you may have lost a channel

your speaker outputs on the amp are bad

you are lacking batterie juice ?
need to replace your stock with a yellow top and
add another to the truck close to you amps !! should work great !!

It is correct to connect the amp turn on wire to the amplifier remote. 5V is sufficient to turn most amplifiers on... It should be 12V optimally.
If the amplifier is not turning on with the ant. remote, the problem is with the amplifier.

This amp is similar to many of the planet audio class D amplifiers. These amplifiers have quite a few problems. If the amplifier has failed, it needs to be serviced by someone who is familiar with the amplifier.

Do not repeatedly replace the fuses. It will lead to more damage and a more expensive repair.