Question about Ricoh Office Equipment & Supplies
SIR HOW SOLVE ERROR SC544 PRINTER RICOH SP 210SU
Posted on May 09, 2017
SC 556 Pressure roller fusing lamp temperature fluctuation
The pressure roller
temperature changes by
±20°C or more in one second.
This occurs three times in one
minute or two consecutive
• Loose connection of
the pressure roller
thermistor 1. Check if the fusing unit is properly set
and connected to the main frame.
• Loose connection 2. Check if the pressure roller thermistor
connector is firmly connected.
between the fusing
unit and main frame
3. Replace the fusing unit.
Posted on Dec 01, 2008
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Heating roller overheat (software error)
The detected heating roller temperature stays at 230°C or more for 1 second.
• Defective PSU
• Defective lOB
• Defective EGB
Related SC code: SC 543
1. Replace the PSU.
2. Replace the lOB.
3. Replace the EGB.
This is the simptoms of the service manual , you should check that your power output is stable and double check if there is not anything like paper stuck some were in the fuzing unit wich could also cause the fuzer to over heat
Posted on Nov 16, 2007
Tips for a great answer:
Oct 04, 2018 | Ricoh Office Equipment & Supplies
Jul 26, 2018 | Ricoh Office Equipment & Supplies
May 10, 2018 | Ricoh Office Equipment & Supplies
Apr 03, 2018 | Ricoh Office Equipment & Supplies
Mar 27, 2018 | Ricoh Office Equipment & Supplies
Feb 22, 2018 | Ricoh Office Equipment & Supplies
Oct 04, 2015 | Ricoh Office Equipment & Supplies
Aug 04, 2011 | Ricoh Aficio SP C410DN Laser Printer
Oct 24, 2019 | Ricoh Office Equipment & Supplies
13,599 people viewed this question
Usually answered in minutes!