Question about Frigidaire Ovens
I have an older Frigidaire oven RG74BC*1. The temp control knob has come loose and caused a short, popping the breakers. Any suggestions?
My best guess its A Frigidaire wall oven, circa 1966-1970,
unsafe to use at any time if the temp controller trips the circuit breaker
could be the oven thermostat causing the trip as well
if Frigidaire are still in business
You will need to ask an electrician to fit a /tested used controller or new superseded part temp controller and knob
Posted on Oct 11, 2016
Tips for a great answer:
Hello Shawn Lloyd, thank you for your post!
I see that your Frigidaire range blew the breaker to your home out and now the oven will not heat up properly. There is not information provided in order to test the control panel I would recommend having a professional technician for proper diagnosis and repair. The technician will be able to use appropriate tools in order to verify the control panel is working properly. -Matt
Nov 16, 2014 | Ovens
Apr 18, 2014 | Frigidaire Ovens
Hello - From my research part number: 318184400 (clock) seems that it has not yet been updated and still the same part number for the MSRP: $163.04. Part can be purchase directly from the manufacturer or a part distributor in your area (part could possibly be different with them). Typically error code F10 could indicate a variety of issues. The range could possibly have a runaway temp (higher than normal temps), shorted keypad, faulty EOC (Electronic Oven Control) or, display wire harness missing/not connected. Usually, this code means to replace the EOC. You may be able to reset the range by disconnecting the power to the unit for up ten minutes. Usually this will clear most false error codes. You can disconnect power by either unplugging the unit or flipping the circuit breaker off and back on. If resetting the unit proves to be ineffective, I would recommend contacting a professional to move forward accurately.
Oct 24, 2012 | Frigidaire Ovens
This means a
loose/broken wire on the oven temp sensor or the oven temp. sensor itself is
bad and should be replaced. To solve this issue test the oven temp. sensor, it
should read between 1080-1120 ohms, if the rating is more then that and the
door appears to be closing fine then it is the control board that is bad and
should be replaced. Hope this helps...please post back for further assistance.
Sep 29, 2011 | Frigidaire 30" Self-Cleaning Freestanding...
Sep 22, 2011 | GE JKP15 Electric Single Oven
Jan 10, 2010 | Ovens
Sep 14, 2009 | Frigidaire Ovens
May 20, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Apr 11, 2008 | Ovens
Dec 15, 2018 | Frigidaire Ovens
74 people viewed this question
Usually answered in minutes!