Where to download updated driver for this hdd? Thanks.

ACHi drivers/firmware updates are loaded after xp generic driver installation, you only need to have the drivers handy on a floppy during the xp installation for a raid driver array

rather doing a driver hunt which can take hours

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions

this will automatically search for and find the correct driver
you will have to update every driver individually once you update you

might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

also at cnet
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for

IE: motherboard name sound drivers
you might have to try a few times to get it right

http://download.cnet.com/drivermax/3000-18513_4-10572602.html

Windows 2000/XP/Vista/7/8 free driver program

http://download.cnet.com/drivers-for-free/3000-18512_4-75548155.html

Windows XP/2003/Vista/Server 2008/7/8 free drivers

http://www.downloadcollection.com/device_doctor.htm

Device Doctor is a freeware Windows application that scans your computer hardware and checks to see if there are new driver updates available for your devices. It also locates drivers for Unidentified Devices in the Windows Device Manager. This tool was designed to be very simple and easy to use

http://www.innovative-sol.com/drivermax/
free program, paid update available

hope this helps

Hello hassen_ba637,
go to this "Website," and "Fill-in" or {Choose} any information needed to get the "Drivers" you need. Than you'll be able to "Download the Drivers."
If this information helped? Return and give a "Helpful Rating," please!
Thanks, paul7of9
Click here: http://www.samsung.com/us/support/downloads

To fix the HDD. Take these steps.

First, click to open the Computer, by clicking on the "Computer,"
on your "Desktop Screen" or click on the "Start Button.
In the (right shortcut menu), select to open the Computer, by {right} clicking on it.

• Check to see if there's a Hard Drive (C:)
• If the area is (Blank)?
• Go to and select Control Panel, by clicking on the Start Button.
• Scroll to find the"Hardware and Sound category, and click on it to open.
• Next, scroll, and select the "Device Manager."
• In the [Device Manager]; check to see: if there is a [Disk Drive] Icon?
• You need to "Update the Drivers."
• Open the "Disk Drive" by {2x clicking} on it.
• Select the {Driver Button}, click on it to 'start the update.'
• Follow all the instructions!.

"Remember to click on the Apply and OK buttons when finished!"

• Restart the Computer, afterwards. to fix the 'problem.

If this information helped? Return and give a "Helpful Rating," please!
Thanks, paul7of9

You might be using a lower version of OS in your packard bell computer. You will need to download and install a device driver for your hitachi HDD. Im not sure of the HDD model that you have but you can try searching the driver for the packard bell Operating system

Yes go to this site:

http://us.acer.com/acer-v2/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3750&sp=page15e&ctx2.c2att1=25&miu10ekcond13.attN2B2F2EEF=3750&CountryISOCtxParam=US&ctx1g.c2att92=453&ctx1.att21k=1&CRC=2054404012

Select Notebook, Aspire, and then the model number. All the software is at the bottom.

You will have to download drivers on to your pc for the camera. You may be able to get them at the panasonic website or others.
The driver has to be updated for pc to recognize the video camera. After driver is downloaded, turn camera on, than connect it to the pc.
Than, go to "my computer" and look to see if the camera drive is there.

Hi there
To update the bios just go to the motherboards manufacturers support website, there you can download all the drivers for the motherboard and the latest bios update.

Good luck and thanks for using Fixya!!!

HP.com
:: "support/Drivers"; Put in your model # then your Operating system then:download updates/drivers

The link for the drivers are:
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=K8V

And, Yes, it is completely safe to do that, but just make sure in the process of moving your HDD, do not send a static shock to it because it will fry it and make it lead to many failures. (This has happened to me before when I reformatted a computer and swapped it in computers)

Hi gordonal123, installing drivers through safe mode is not recommended. If you want windows to function correctly than do a fresh install of windows. Over writing the Gateway hdd will cause you more grief. Windows registry will go nuts.
Link to download the Asus K8V drivers.
http://support.asus.com/download/download.aspx?SLanguage=en-us
Here is what you need to do. Boot to your windows CD while using the Gateway system & hdd. Create a new partition within the free space of the Gateway hdd. (Follow windows onscreen instructions to create a new partition within the free space of hdd). (This will maintain the current windows function).
Restart windows when finished. Windows will create a second partition on the Gateway drive. Go to the Asus link above & download all the drivers for the K8V MB, onto the second partition of the Gateway hdd. Once downloaded & uncompressed into their own folders you can than boot to the windows CD & format the primary partition & install windows fresh onto the formatted partition. When finished you can install the K8V driver still located on the secondary partition. Copy & past these driver folders to your primary partition. Than use windows disk management software to erase / delete the secondary partition. (diskmgmt.msc).
When finished you'll have all the drivers for the K8V MB, no need to buy a PCI LAN card & more importantly a fully functioning windows with-out issues.

Good luck gordonal123!
Take your time.
Mike