Why can't where to retrieve my down load

well you search --singer operators manual for inspiration model 4220 -- and then down load the pdf version
fixya site doesn't take orders

You can try searching forr:

Make Model parts diagram
or
Make Model parts list

Sometimes you will get a drawing of all the parts and in what order they are assembled.

sue
as you have assumed that we all know what machine yo have , there is no one that can help you with this
so go google and type in--workshop manual ( or user manual if that is what you want) for ( make , model) sewing machine
find a site that has a pdf version for your machine and down load it

get a user manual from the net
go google and type in-- user manual for (make and model not stated) sewing machine --- and down load any pdf version found for that make and model
there should be a level of knob that you move to change the stitch type

google manuel for janome lock 34 DR and then down load the best repliy

The Singer Contempra 930 is almost a mirror image of the Singer model 1425. Only difference is placement of Stitch length & Reverse Stitch dial and a variation of the Rear Thread Guide. You can download a free pdf manual of the Singer Model 1425 from www.singerco.com.

Go to www.brother-usa.com and you can download your manual for free, under support for home sewing and embroidery. Why didn't you get a cord? Take it back where you bought it. You are going to get charged about $50 for the cord and the foot pedal. I never heard of this happening. You can also call Brother at 1-877-276-8437 and they can help you.

HAD THE SAME PROBLEM. GO TO WWW.SINGERCO.COM LOOK FOR MANUELS (ON THE LEFT HAND SIDE OF PAGE) YOUR LOOKING FOR PDF FORMAT YOU CAN THEN DOWN LOAD TO YOUR COMPUTER AND THAN PRINT IT OUT NO COST FOR THIS DOWNLOAD.

Hi,
any one have a power cord/manuel for a Janome 2049 Harmony Sewing Machine?

all machines thread the same. TTN tension,take up, needle.
Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test,adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.

Sewman7