Question about NordicTrack Exercise & Fitness
Unplug unit and remove motor shroud if you are savvy with a multi meter then try these trouble shooting procedure:
Perform and elevation calibration again, On the display, can you see numbers counting down and up and the treadmill is going up and down? If yes then the unit will proceed to work, if no when power is on, check on the lower board, on connector J5, do we have 5V DC between pin 1 & 3? If yes During Calibration, J5, between Pin 5 & 6, on the lower board, do we have 120V AC when treadmill is going up?
If Yes During Calibration, J5, between Pin 4 & 6, on the lower board, do we have 120V AC when treadmill is going up?
If Yes During Calibration, J5, between Pin 2 & 3, on the lower board, do we have DC voltage varying from 1.15 to 3.00? If any of the above is no then then the lower board will need replacing if all is yes then elevation motor needs replacing.
Posted on Aug 01, 2010
Watch this videos+ tip:
Posted on Nov 09, 2011
You need to call Icon ASAP and get a tech out under warranty to fix the issue.
Posted on Jul 06, 2012
Testimonial: "Very helpful. Thank you "
1) Lube the elevation motor, see the diagram, parts gear + shift
2) adjust the POT, for a little and see if there are better improve.
3) RUN the software calibration for diagnose, troubleshooting, fix it.
God bless you
Posted on Jul 10, 2012
Tips for a great answer:
Aug 31, 2014 | Nordic Track NordicTrack Treadmill, A2550
May 25, 2014 | Nordic Track Commercial 1750 Treadmill...
Oct 15, 2013 | FreeMotion Tt30 Incline Trainer
Aug 02, 2012 | Proform XP 580 Trainer Treadmill
Jul 09, 2012 | Nordic Track Exercise & Fitness
Feb 26, 2011 | Nordic Track Nordictrack Apex 4100i...
Nov 20, 2010 | Precor EFX 546i Elliptical Version 4
Jun 06, 2009 | NordicTrack E4000 Treadmill
May 31, 2009 | Nordic Track Nordictrack Apex 4100i...
329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: