Question about Summit Washing Machines
Help me please need to get it to start wash its not washing because of the error code
Click on Zanussi (below FIXYA) on this website, type in your model number & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, voila! u hv your manual on line. And dont forget to rate me, on this great site.
Posted on Dec 05, 2007
It means that there is a fault in the heating circuit and the heater is not working
The listed site deals with this problem so take a look and if you are fully capable of testing, follow the troubleshooting instructions but always double check that the unit is unplugged or disconnected from the electrical supply.
And remember kindergarten rule #1 "If in doubt, don't" with everything that is potentially dangerous. Electricity kills so a service repair bill may be a better solution.
Hope this helps.
Posted on Sep 09, 2009
this is a tachogenerator fault or the drive motor brushes are faulty. you will need a Miele service tech or a Miele service agent to look at this.
Posted on May 24, 2010
Tips for a great answer:
Jan 06, 2016 | Washing Machines
Jul 05, 2014 | Summit SPWD1800
Jun 23, 2011 | Washing Machines
Nov 13, 2010 | Washing Machines
Jun 03, 2010 | Hotpoint Ultima WF860 Front Load Washer
May 19, 2009 | Samsung SW62ASP Top Load Washer
Dec 17, 2017 | LG Washing Machines
46 people viewed this question
Usually answered in minutes!