GE WBSR3140DW Top Load Washer Logo

Related Topics:

Gregory Gibson
Gregory Gibson Posted on Oct 01, 2016
Be the first to answer

Have water under tub in GE washer and smells bad

Answer This Question

5 Related Answers

Anonymous

  • 51 Answers
  • Posted on Jan 23, 2008

SOURCE: GE WHRE5260E1WW Washer

The mixing valve needs to be replaced. It should be under $50 and is easy to do.

Ad

Anonymous

  • 6 Answers
  • Posted on Feb 11, 2008

SOURCE: drain problem in GE WBSE2090A washer

hello, if you washer is not or isn't fully draining that sounds like something might be in the pump.Icheck for any hose blockage as well.If there is a bad smell that might be dirt or a peice of clothing or anything. so my suggestion is to check your drainage hose, the pump or maybe try even to syphan out the pump which means put the drainage hose in a bucket lower than the washer or your drainage is higher than the washer. good luck...

Anonymous

  • 188 Answers
  • Posted on Feb 21, 2009

SOURCE: GE Washer fills but will not run through cycle

Sounds like a bad motor. It's likely shutting off from it's internal thermal switch. Try unplugging the motor's molex connector and replugging it, it could also be a loose connection.
Good luck.

Anonymous

  • 119 Answers
  • Posted on Jan 31, 2010

SOURCE: washer is filling too much and water is coming out overflow

you need to clean the pressure swith hose on the lft side of tub small rubber hose stop use in liqid soap

richroth

Richard Roth

  • 9472 Answers
  • Posted on Dec 02, 2010

SOURCE: 2008 GE PROFILE WASHER. THE WASHER WILL RUN

You need to replace the "lid switch". Here is a link to the part you need. Here is a link to a video that may help you.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My front end washer won't pump the water out and it smokes when it spins at the end of the cycle.
Sounds like it's a bad motor or the belt driving the tub is slipping.
If the motor is bad it will smell really bad. The belt slipping won't be as bad.
Have someone inspect both.
Hope this helps.
Read full answer
Apr 06, 2015 • GE Washing Machines
0helpful
1answer

GE Washer Mod# wcsr2090d5ww
It's normal for some water to stand in bottom of outer tub. It shouldn't be visible in the inner tub though.
Read full answer
Oct 31, 2017 • Washing Machines
1helpful
1answer

The washer is leaking from the bottom
Your center seal is going bad or you have a bad hose, leaking water pump, or a cracked tub but GE is notorious for there center tub seals to going bad I would recommend a qualified service technician come look at it to rule out which one it is if your centers tub seal is bad I would buy a new washer but sorry for the troubles.
Read full answer
Jan 22, 2011 • GE WBSE2090A Top Load Washer
1helpful
1answer

There is water left under the tub after the wash is over. When I move the tub I can hear the water sloshing. How can I get rid of the water. It makes my towels smell like mildew.
If it is draining down and spinning the clothes dry then all of the water is draining out. There is only about a 1/2 in space under the tub. There is a balance ring around the top of the tube that holds water. That may be the sound you are hearing? Try washing a load without anything in it on hot and use a box of baking soda. See if that will help with the smell. My washer leaves a mildew smell sometimes. I started running an extra rinse cycle on it. And that helped. I think it was my water.
Read full answer
May 28, 2010 • General Electric WCSR2090D Top Load Washer
0helpful
1answer

Agitator spins tub doesnt
GE USUALLY PUTS THE NUMBERS UNDER THE WASHER LID ON A METAL TAG. BUT I HAVE SEEN THEM ON THE REAR OF THE WASHER WHERE THE HOSES ARE LOCATED
Read full answer
Sep 16, 2009 • GE Profile WPSR3120WWW
0helpful
1answer

I have a top load GE model #WBB4500G, and our clothes comes out smelly. It is horrible. We are constantly having to rewash clothes, this is rediculous. I've heard of this problem with front loaders, but we...
You have an inner and an outer tub. The outer tub may be holding too much water. The smell may be the soured water in the outer tub. You should take the washer outside and drain it completely. Then replace the drain hose before you put it back inside. Hopefully, this will slove your problem.
Read full answer
Sep 04, 2009 • GE WSXH208A Front Load Washer
0helpful
2answers

Mildew in ge front load washer
Try two things: Add several cups bleach to the tub and run it a complete cycle. When not in use, leave the door open so it will air out.
Read full answer
Jun 04, 2009 • GE WBVH6240F Front Load Washer
0helpful
2answers

Oil on floor under washer
Oil is generally not a good sign. It means that the tranny seal is blown OR it means that the tub seal is bad which allows water to enter the tranny (water is heavier than oil... if water gets into the tranny it will displace the oil and force the oil out)

This being a GE? I'd wager that a tranny job is in order. If the machine is less than 5 years old it's under warranty so you'd call GE at 1-800-GE CARES. If it's more than 5 years old? Your washer is no more than a boat anchor. Get a new washer, preferably a Whirlpool. The repair cost for a new tranny will out-weigh the value of the machine.

Hope this helps.
Read full answer
Mar 23, 2008 • Kenmore 22642 Top Load Washer
1helpful
1answer

Drain problem in GE WBSE2090A washer
hello, if you washer is not or isn't fully draining that sounds like something might be in the pump.Icheck for any hose blockage as well.If there is a bad smell that might be dirt or a peice of clothing or anything. so my suggestion is to check your drainage hose, the pump or maybe try even to syphan out the pump which means put the drainage hose in a bucket lower than the washer or your drainage is higher than the washer. good luck...
Read full answer
Jan 23, 2008 • GE WBSE2090A Top Load Washer
0helpful
1answer

Odor when starting cycle
Check your water softener(If so equipped). This can cause foul odors in the water supply if not properly balanced or maintained. Good luck!
Read full answer
Sep 06, 2007 • Fisher and Paykel GWL11 Top Load Washer
Not finding what you are looking for?

View Most Popular

WBSR3140DW Top Load Washer

  • Washing Machines

Related Question

My front end washer won't pump the water out and it smokes when it spins at the end of the cycle.

  • GE Washing Machines

445 views

Ask a Question

Usually answered in minutes!

Popular Questions

GE front load washer (clothes)

GE WSXH208A Front Load Washer

My Ge washing machine is leaking from the Bottom

GE Profile Performance WPSF4170WAA

GE top load Washer ripping clothes

GE Energy Star WCVH6260F Front Load...

"Dr" error code

GE Spacemaker WSLP1100D Top Load...

GE Adora Front Load Washing Machine Problem

GE WSXH208A Front Load Washer

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Virgil Watts

Level 2 Expert

267 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
GE washer.pdf. user-manual-WBSR3140DW...

WBSR3140DW Top Load...

Loading...