Just got error code B200 and to unplug and cll support? Any ideas?

http://forums.usa.canon.com/t5/Personal-Printers/Canon-MX860-repeats-B200-error-code-brought-it-back-to-store/td-p/489

http://forums.usa.canon.com/t5/Personal-Printers/Canon-MX860-repeats-B200-error-code-brought-it-back-to-store/td-p/489


FIND THIS.

The fault in Canon Printer Error Code B200 indicates a defective print head. A print head is a component that directly collects the ink onto the paper from the cartridges, which means it's one of the most critical parts of the printer.
Canon Printer Error Code B200, which can signify a hugely damaging system error, is one of the most feared.

Want to Correct the B200 Canon Printer Error Code?

1. Unplug and leave your printer disconnected for a minimum of 30 minutes.

2. Open your printer's door and you can move the print head so you can reach it.

3. Take off old ink.

4. The complete Canon Printer Error Code B200 solution.

Check this Blog - Canon Printer Error B200

http://www.youtube.com/watch?v=AyHaxjFg8aI

It is my pleasure to guide you.

After looking at some information about the printer error and that the error tells you to "contact the service center" I have given you places to contact about this error. Some of the information that I have looked at about the error said that several things can cause the error. I suggest that you contact Cannon through the 'Email Assistance'.

Service & Support
Support Home ' http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx860#
Email Assistance ' http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx860#
Solutions List:
Contact Canon for B200 error (MX860)
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx860#
Press ON switch and wait a few minutes before powering back on the device
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx860#
Good luck and please post back that you are successful, giving thumbs up, or if I can be more helpful.

Hello and Welcome to FixYa!

According to Canon's documentation, Error B200 is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board, a physical hardware malfunction.

To solve it:
Turn off the machine, and unplug the power cord of the machine from the power supply. Again connect it and turn on.
If the problem is not resolved, then best option is to take it back where you purchased it or contact Canon service center about the error code or To get support by Canon on phone, then call at 1-800-OK-CANON (1-800-652-2666)
They will surely solve it.

I hope this solution helps you
For further assistance, I am here to help.
Thank you and Keep Visiting FixYa!

Buy a new printer because by the time you do all that, its cheeper to just throw it away. I have a PIXMA mX860 with the error b200. Only had it 3 years and took great care of it. P.S. Dont buy a Canon.