Problem of apple ipod firmware damage

Damaged hardware is responsible for the most obvious iPod sound problems.
In such cases, Apple may be able to help you fix the problem, depending on the status of your warranty.
All iPods have a one-year warranty according to Apple's website.
Software problems can also affect your audio.
For example, downloading a non-certified Apple application can stop your sound from working correctly.
Returning your iPod to its original factory settings fixes many of these software glitches.

Plug in a different set of headphones and test the sound.
If that set works, your old headphones were the cause of your audio problems.
If your iPod still doesn't work, proceed.
Remove an application on your iPod Touch if you installed it right before your sound stopped working.
Hold your finger over the top left corner of the application.
It will shake.
Touch the "X." Touch the "Home" button.
Restore your iPod to fix other potential software problems.
Open iTunes. Plug the iPod into your computer with a USB cord.
Click on your iPod on the left-hand menu.
The iPod will be listed under the name you assigned it when you first set it up.
Click the "Restore" button on the menu.
Leave the iPod alone while it restores.
It may take several minutes.
Test the sound once the restore is complete.
The iPod syncs after restoration.
Once the sync is complete, the process is over.
Contact the Apple Technical Support line at 1-800-275-2273 if your audio still doesn't work.
Have your iPod with you.
Damaged hardware is responsible for the most obvious iPod sound problems.
In such cases, Apple may be able to help you fix the problem, depending on the status of your warranty.
All iPods have a one-year warranty according to Apple's website.
Software problems can also affect your audio.
For example, downloading a non-certified Apple application can stop your sound from working correctly.
Returning your iPod to its original factory settings fixes many of these software glitches.

Plug in a different set of headphones and test the sound.
If that set works, your old headphones were the cause of your audio problems.
If your iPod still doesn't work, proceed.
Open iTunes. Plug the iPod into your computer with a USB cord.
Click on your iPod on the left-hand menu.
The iPod will be listed under the name you assigned it when you first set it up.
Click the "Restore" button on the menu.
Leave the iPod alone while it restores.
It may take several minutes.
Test the sound once the restore is complete.
The iPod syncs after restoration.
Once the sync is complete, the process is over.
Contact the Apple Technical Support line at 1-800-275-2273 if your audio still doesn't work.
Have your iPod with you.

Wont read what ?

Sometimes, you might find that your computer does not read that the iPod is connected to the USB port, preventing the synchronization of new files.

There are several potential causes for this lack of hardware recognition and many steps can be taken to troubleshoot the causes.

Reset your iPod's internal software using the key combination appropriate for your model. Apple's support documentation details how to do this for each available model.

(See Resources)

Install all iTunes software updates and restart your computer.

Connect your iPod directly to a USB port on the computer.

Do not attach through a keyboard port or USB hub.

These might not provide enough power to operate the iPod.

Connect the iPod to a secondary USB port.

If the iPod is recognized now, the original USB port might be damaged.

Connect the iPod using a secondary iPod USB cable.

If the iPod is recognized now, the original USB cable might be damaged and should be replaced.

Restore the iPod using a computer that can read it as a last resort. Connect the iPod to another computer, launch iTunes and select "Restore" from the iPod information screen.

This will erase all data and restore default settings.

Contact Apple support or visit an Apple store for further help if your iPod still cannot be seen. An advanced hardware issue might be present and a warranty hardware replacement might be indicated.

Hope this helps

I Pod's work well with I Tunes download I Tunes and set the software to seek music files on your drive ones you have downloaded my suggestion is pick one download center file to seek when I Tunes searches automatically. It will sync you tunes and update the I Pod rather cool and works well for I Pod's designed for it. Click Here

http://support.apple.com/kb/HT1719 - this might help you.

Download the latest firmware from apple and update the firmware and it will be OK

if the firmware is damaged, then it's as simple as pluging it into your computer and on the ipod 'menu' there's a button below "check for new version"
click on that, it will reset your firmware
if that doesn't work, take it to apple
if they can't fix it, trash that old stupid thing, it's time to get a new ipod

turn the hold off and hold the middle button and play for about 30 seconds and the apple logo will show up then plug it into itunes and hit the restore button on the ipod tab in itunes.

download latest quick time player

You can go to www.apple.com and look for a driver. Your sservice provider will have your passwrod and all of th einformation that you gave them when you purchased the phoneand initiated service.

Just restore it in itunes by going to the ipod's main menu after you plug it in to your computer and press the restore button. It should tell you to back up your information. Do that and click yes. It should be back to normal then.