Question about Pride Victory 4 Wheel Mid-Size Electric Scooter
For an older version of the Victory (I have the Victory 3) click on this link for the full manual in pdf format. :)
Posted on May 06, 2010
Check that it is unplugged from the charger. Then check the freewheel lever to ensure it is in gear by placing it out of gear first, then placing it firmly in gear. Do this while the key is OFF. Wait three seconds, then turn back on and it should go.
If it doesn't, and you are sure it's in gear and unplugged from the charger, you should be getting a fault code flashing on the charger display. Consult your owners manual to determine the fault and proceed as recommended.
Here's a link to the owners manual if you've lost yours. Good luck.
Posted on Jul 11, 2009
SOURCE: Pride victory mobility scooter
1. Remove the four screws on the outside perimeter of the console base.
2. Lift off console top cover and disconnect the front-to-back cable.
3. Remove the throttle lever from the throttle pot.
Remove the four screws holding the console base to the mounting plate.
Posted on Nov 27, 2008
In electronic equipment, it is often a capacitor (One of those electronic thingies in the control box.) that begins to fail and results in a high pitch noise (Oscillation) that will drive you crazy. They still operate correctly but over time they will totally fail. Unfortunately this may require a technician to assist. Happy scooting. Regards Chris… [email protected]
Posted on Jun 22, 2009
Tips for a great answer:
Nov 30, 2017 | Health & Beauty
Dec 03, 2015 | Pride Mobility Pride TSS300 Power Chair -...
Nov 28, 2015 | Pride Health & Beauty
Jul 16, 2015 | Health & Beauty
Jul 11, 2014 | Pride Mobility Products Pride Victory 10 -...
Aug 02, 2011 | Pride Mobility Victory 3 Wheel Electric...
Oct 21, 2010 | Pride New Mobility Victory XL 4 Wheel...
Mar 02, 2010 | Pride Victory 4 Wheel Mid-Size Electric...
3,426 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: