Plasma TV blinking red lights

Panasonic Plasma TV Repair - Understanding 14 Blink ...

? 8:35
https://www.youtube.com/watch?v=iHBIiRxhe0w
Sep 26, 2014 - Uploaded by ShopJimmy.com
Panasonic Plasma 14 Blink Code Explained with Repair Info How to ... I guess I'll try the SC board and if that does not work simply save up for a new ... The red power led was flashing 12 timespause a few seconds then flash 12 again. ... It powers up and shows the green power light is on, but there's no ...

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html

Oct 24, 2015 - More about : power light flashing wont turn ... December 20, 2013 10:12:55 AM ... sound like it is coming on then it shuts off and the red power light flashes slowly. ... 50in Plasma tv power light is flashing 8 times and won't turn on. ...tv to come on bcause the power button keep blinking my tv will not come on.

It sounds like the low-voltage control relay has gone bad. This is what brings the tv out of standby and into full-on. Does it havr the same responce with button and remote? the other possability is the high voltage plasma exiter circuit is experiencing thermal-overload. If it's the first, an easy fix. If second, then the tv is a gonner. Not worth the money to repair. Plasmas unfortunately by design only lats 6-10yrs.

You did a good thing; really!! Keep that TV aside you always.

Tries unplug,replug the tv back like an hour later.The tv now,should resetting itself back to the factory setting.The tv should work now.Not,than the tv power supply board have problems,not giving the tv it wright voltages anymore.The tv power supply board that the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Power supply board have dead capacitors.U know how to solders?Buy these capacitors to replaced them to have power back.Or u can buy a whole power supply board for the replacement at these websites Shopjimmy.com,Ebay.com for refurbish power suppply board.

these tv have a comon short problem w the video &audi bord shield if you remove the cap only it usally fixes this

unplug tv overnight. if that doesnt work the powersupply is probably bad.

2 blinks means the unit is having problem with 12 volt supply.
while power on you can check 12DC on power supply before shutdown.if the voltage is constant before shut down I would recommend to replace D board.

you msy have problem with power supply there are some small caps that give you this problem call a good local TV shop that work in plasma Television (job for experienced Tech)

I had a similar problem with my magnavox tv with the blinking light issue. Eventually it just didn't come one anymore. Looking at other forms they said the problem was a bad capacitor number 2074 located on the power supply board. When I opened my tv, I noticed that the capacitor was bulging and burnt up. I bought a new one labeled 2200uf 35v and did some solder to attach the new piece. Put the tv back together and it works like new. No more blinking light. I hope this helps.