Can't remove battery to replace. 7544BL

https://www.youtube.com/watch?v=cZ1LSGr9I8Y

scale operates on 1 CR2032 lithium battery.
open small plastic rectangle cover on bottom of scale.
battery is common 2032 sold in some dollar stores.
see page three in link for more information..
<file:///C:/Users/Jim/Downloads/4a24539c-fc68-4000-9e88-3f257a16ef78.pdf>

Replacement Cordless Drill Battery for Irobot Roomba 650

Type: Ni-MH

Volt: 14.4V

Capacity: 4000mAh

Color: Yellow

Weight: 518g

Dimension: 138 x 53.9 x 48.5mm

http://www.drill-batteries.co.uk/shopbatteries.php/irobot_Roomba+650_battery.html


http://www.drill-batteries.co.uk/shopbatteries.php/irobot_Roomba+650_battery.html

Watch the youtube video at the lonk below.
Replace your iPhone 5 battery in 2 Minutes

How do I replace the battery in my Taylor 7544BL Cal-max scale.
We removed the back and the lithium battery is positioned oppisite the opening?

There is one bolt at the base of the battery that holds a wedge that retains the battery to the battery tray, remove it.

hi bonniebj2007,

below is the link where you can find the instruction book for your weighing scale.

http://www.taylorusa.com/media/IBs/7544BL%20IM.pdf

To replace the battery:

1- remove the rear (passenger) seat by removing the single bolt behind it. Remove the seat by lifting it up and back

2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and back.

3- Removing the seats will give you access to the battery under the driver's seat.

4- Carefully remove the positive and negative battery cables from the battery, then lift the battery straight up.

5- Place the new battery in the bike

6- Replace the cables, red is positive (+), black is negative (-)

7- replace the seats, and you should be good to go!

norelco battery replacement NiCd two batteries pack for electric shaver philips norelco 5821xl replacement parts.

just left of the battery housing are two bolts one holds the other will lower the battery box so you can take the cover and side off, to replace the battery remove the neg. cable off bike then remove pos. off battery pull battery out then remove neg. off battery