Canon IR3570 copy over to another device after the first sheet leaves appear Error 000024-0001.Please reply

there doesn't seem to be a disk or software for this device. if you are needing the driver can be found here.
https://www.usa.canon.com/internet/portal/us/home/support/details/copiers-mfps-fax-machines/support-multifunction/imagerunner-3570?tab=drivers#Z7_MQH8HIC0L88RB0AMD0F1Q42K25

him that error mean there is temperature error. you need to clear that error from service mode first.
press aditional function
press 2 and 8 at the same time
press aditional function
service mode should appear in the screen
select COPIER / FUNCTION / CLEAR / ERR and press OK
disconnect the machine for 5 seconds
turn the machine on and make some copy test

Canon imageRUNNER 2870 Copier Error code e000024 ...

www.fixya.com > ... > Canon > Canon imageRUNNER 2870 Copier
... error code e000024-0001 E000024-001 is a problem with the developing assembly it's usually either a faulty toner sensor sometimes just toner stuck to it just ...

fixing assembly overheating, the temperature of the fixing assembly is abnormally high.
turn the machine off for some time and then on it. if it continues indicating, reset condition in service mode ( copier>function>clear>err). replace main thermistor. replace DC controller PCB.

u have to need replace ur fixing film

Reconnect DC controller and power supply,check connection with the printe

this is referring to fixing film rotation error, check the fixing film it could be damaged or there may be dirt (wast toner) on it. then clean it, if not you replace it.

Sounds like you have the wrong driver installed, go to canon website and download a new driver for the machine

Hello, I have one of these. The iR3570 has no smtp server - you would need the iR3570i. It may be possible to buy the additional hardware and software to effectively turn your 3570 into a 3570i - but they are getting on a bit and it will not be easy to find. Once the machine is upgraded the smtp option will appear in the menu.
Good luck to you.

this error is related to machine hardisk problem/failure,,It needs hardisk replacement with IR 3570 sytem software You need to contact your service provider to fix this problem