My system keeps going black and white - Philips Cineos HTS9800W System

This is not the fault with remote control. It is with your TV itself. Contact any service technician.
Gopakumar Gopalan Google

Since I don't know what operating system you have on your computer, here are the steps for all Windows operating system from Canon for your printer. If these don't work, let me know but usually once you change the settings for black and white only, it works fine.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310#ServiceAndSupport

White smoke is usually the sign of a blown headgasket. I would have the coolant system pressure tested before any serious damage is done.

Keep in mind this codes:
- Black is excessive fuel
- Blue is oil
- White is coolant

Then, if you see white smoke from the tailpipe, you have coolant escaping into the intake system.

Keep us updated.

hi...while you give the printing command go to option and select black and white option. u can get black and white.
If u get yellow tone image means that the catridge of black might hav finshed please check the catridge and replace it.

Here you go.
Radio Side -- Car side
12v (Yellow) -- Orange/Black
ACC (Red) -- White/Black
Ground (Black) -- Black or chassis ground(bare Metal)
Pwr Ant (Blue/white) -- Pink
If your not adding and amplifier than your system remote should be used for power antenna which is the pink.
Hopefully this helps
Please Vote & Rate thx

Yes quicker to download updated cam prog from www,logitech.com

Facing Wrongway open options click mirror.

Go to the "Bose" menu screen viewing on your TV (make sure no dvd is in the player) Go to your Video controls and check your output, chances are, if your using the component output your player is set to "S-Video". Should fix the problem. Hope this helps. If it's still not viewing correctly, post a comment and I will help you some more

Jst go to printer and faxes in the control panel and,rgt click ,go to properties,click on color management and select print in black only.it should work fine.
In case it doesnt you can always contact a free online technical
support with an online live techbuddies technician at
http://tinyurl.com/m7ghqz

The half picture is a verticale problem. This is difficult to repair. Send to a repair shop.

Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.

Orange/white
To lighting switch terminal.

Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).