Have forgotten password for my imate jamin- havent used it for a while.was flat and i recharged it and cant remember the 4 digit password that needs to be put in after the windows mobile screen
You can try with hard reset, i am not sure if it will work : keep pressed volume - , on/off
button and reset button( from the bottom side of the device) for a few
seconds
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have already tried the re-aligning of the touch screen, and you have failed. It is better to bring your Imate to a service tech, to check the software details of your pda.
Or if you want, try to reset it or master clear so that it will go back to its factory default.
If you cannot really turn on the power of your Imate, even if you are charging it, make sure you are using appropriate charger! Once you have a chance to turn the power, try to make a hard reset. Or better if still not charging, try to recharge it using your USB cable and connect it to your pc or laptop.
And about the battery, usually it will not last for a year, atleast 6 months we need to change the battery especially PDAs, to have the efficient performance of it. Try to buy a new battery and test it. If still not work, perhaps you have a problem with the charger.
Good luck! if you need further assistance, let me know!
I dissambled my iMate JAMin and found that one of the wires for the speaker had been broken, they seem to be pretty weak - resoldered the wire now speaker works fine.
I had the same problem with my Jamin so sent if off to the technician who informed me the Jarmin's internal circuitry prevents the phone being charged when the battery is under a certain voltage so when you use a plug in charger because the battery has very low power it does not trip a circuit in the Jamin to start the charging process. The only solution to to take the battery out of the unit and charge it with a stand-a-lone charger. Hope this makes sense.
I have had the same problem with my jamin and most of times soft resetting it via the button at bottom solves it. If it happens regularly, you might want to hard reset it. please make sure you backup your data and settings etc
×