I need to order a tension unit for my sewing machine husqvarna 1250 orchidea serie #:33274032

Search for:

Make Model manual

The local Husq-Viking dealer should be able to answer your other questions.

Remove every tiny screw ....the internet tells me I cannot Answer you... you can see. Cuz it finds the two words together to be profanity! wtf!

Is it brand new? If so, take it back to the Viking dealer.

Check with your local Viking dealer.

Is it an embroidery only machine. Typically embroidery is done with the needle in a fixed position while the hoop is moved around.

Is this your machine... ?



If so, then Try this following link, it might be what you are looking for?

Husqvarna Orchidea Manual PDF Download

Check tension levels of both upper tension unit and bobbin case.
With machine threaded, pull the bobbin thread. There should be some tension/resistence. Lower the presser foot. Pull on the top thread. Again you should feel some tension/resistence. If you don't feel any, raise presser foot and test upper thread again. If no difference, it is an issue with the upper tension disks. Brush out any loose threads that might have gotten caught in the upper tension disks which is causing the disks not to close. If there is no difference with presser foot up or down and no threads in tension unit, the tension unit will probably need to be replaced. You should have the machine serviced at the local authorized husqvarna viking dealer. You can find the nearest dealer at the husqvarna viking website - http://www.husqvarnaviking.com/us

Are these, http://www.mysewingmachineparts.com/genuine-best-quality-plastic-sewing-machine-bobbins-4120975-45-husqvarna-viking-white/ , the bobbin you need? The part number is 4120975-45 and they are available at Amazon.com, http://www.sewingpartsonline.com/bobbins-viking-white-4120975-45-10pk.aspx and other vendors.

I hope this helps.

Cindy Wells

try this link for parts
http://www.sewingpartsonline.com/husqvarna-viking-1-sewing-machine-parts.aspx

I just bought a rose myself and am very new to all of this, but I don't think the Emerald is an embroidery machine?? The reader/writer would be for embroidery unless I'm completely mistaken...