Question about Panasonic KX-T7731 Corded Phone
Extension call forwarding is controlled by a timer, and they put these things in the manual. If your CF after 2 rings is from a call to a specific extension, from that extension, dial *713 and a 2 digit number from 00-99 seconds on the intercom. Start with 18.
If your call forwarding is from intercept, then you have a system programming issue and need to look in the installer's manual or check with your system programmer.
Posted on Dec 02, 2010
SOURCE: We have a Panasonic KX-T7433
From the phone, press intercom and dial 790. That clears any "cleaning person" button presses. Check the ringer control button on the left side of the phone to make sure it's on. The "we can't pick up the call" is disturbing because the line should appear on your phone. In a TD system, the lines are normally numbered 01-12, but that's on this side of the pond. If you have ISDN ot EI trunks, they may be different. In a standard key system, the line buttons are called Single CO (SCO) buttons and are programmed by prressing Program 99 on an idle phone, then the button and reading them. If they don't say SCO 01 02 03 etc, you dial 0+01 02 03 etc STORE to change them.
Pick up the handset and drop it back down when you're finished.
Posted on Jul 01, 2011
Tips for a great answer:
Apr 14, 2011 | Samsung S3650 Corby / S3650 Genio Touch...
Apr 06, 2011 | Samsung S3650 Corby / S3650 Genio Touch...
Mar 03, 2011 | Apple iPhone 3G
Nov 03, 2008 | Sony Ericsson Walkman W810i Cellular Phone
Apr 07, 2008 | Motorola Mobility C261 Cellular Phone
Aug 09, 2007 | Motorola Mobility RAZR V3i Cellular Phone
230 people viewed this question
Usually answered in minutes!