Question about Epson WorkForce WF-7620 Wireless Color All-in-One Inkjet Printer

1 Answer

Why is my Epson WF7620 showing" cassette 1 insert correctly"

I have an error with my printer as above.I have tried reinserting the cassette and reducing paper plus increase levels without success.

Posted by Kevin Peter Sibbons on

Ad

1 Answer

Jason Donald Bartlett-caesar

Jason Donald Bartlett-caesar

  • Level 1:

    An expert who has achieved level 1.
    MVP:

    An expert that got 5 achievements.
    Habit-Forming:

    Visited the website for 3 consecutive days.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 31 Answers

The switch inside that makesxeither an electrical connection orca mechanical one tells the printer that the paper tray is home loaded and awaiting commands is not being activated by the tray
The switch has become faulty overtime and needs,a replacement
The bit on the tray that pushes the tray loaded switch has broken off the tray is missing the switch or a wiring fault has developed
And the switch has no power so it still can't see the tray even if it is loaded thus error paper tray missing continuously is being displayed

Posted on Jul 04, 2016

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1010:0455544
This error code indicates a problem related to paper cassette lift mechanism. First thing that you will need to check is, if the printer makes some strange noises at initialization, when the printer is trying to lift the paper inside cassette. You can verify if the lift mechanism on the printer is ok, by removing paper cassette and press the 3 small white switches on the left of printer. At this moment the printer is trying to lift the cassette and you will see a gear that rotates on the right side of printer. Also verify if the GEAR LIFT Z64 is intact by opening the gearbox(the big one from the gears from the right side of paper cassette). This gear is cracked in most cases. Replace it.

May 06, 2014 | Kyocera FS-4000DN Laser Printer

1 Answer

Alarm light
Paper Jam:
Clear the paper jam.
If the printer does not automatically resume printing, press the control panel button.
No Paper/ Misfeed:
  • The paper cassette may be out of paper or not properly installed.
    If it is empty, load a new stack of paper into the paper cassette.
    If there is paper in the paper cassette, make sure it is straight.
    If the paper is curled, straighten it before printing. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper cassette.
  • Reduce the amount of paper in the paper cassette, and then try again.
  • Make sure you use paper that meets Brother's recommended paper specifications.
  • Re-install the paper properly, and then press the control panel button. The printer will start printing again.

May 06, 2013 | Canon PIXMA MP495 InkJet Printer

2 Answers

When I try to print, I get an error message taht the paper is not loaded into the casette. It is loaded, I have tried removing the paper and reinserting it, tried different number os sheets, to not...
Set the paper in the rear tray, and press
the Resume/Cancel button.

Aug 23, 2011 | Canon MX882 All-In-One InkJet Printer

2 Answers

Paper cassette is not seated correctly. check for paper or objects blocking the cassette path. reinsert the cassette and press Start. keep getting this message. started after printing and installing...
I had this same problem and tried everything (I thought) to fix it. Then I saw the solution at:
http://www.retrevo.com/c/sohohelp/blogs/show/6633/I-just-had-my-espon-artisan-800-replaced-and-the-refurb-keeps-saying-that-the-paper-cassette-is-not-seated-correctly#replyForm

Basically there is a plastic pin that tends to break off and stays in the area where the cassette is loaded. It takes up just enough space to keep the cassette from being pushed in all the way. The solution is to turn the printer off, unplug it, then lift up the printer so the broken pin falls out. Once it comes out, the printer will work fine again.

May 12, 2011 | Epson Artisan 800 All-In-One InkJet...

1 Answer

Error message 41.3 paper error How do I fix?
Error 41.1 41.2 41.3
  • Defective connections. Reseat J205,206,207 and laser scanner connectors.
  • Paper multifeed or wrong size paper being used.
  • Paper size selection doesn't match the paper being used.
  • Cassette is overfull or improperly adjusted


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Dec 16, 2010 | HP LaserJet 4 plus Printer

1 Answer

I am getting a "fax output error - cassette." It
Hi,

Pretty sure your paper tray button is set to get paper from the bottom paper cassette which is the tray that slides into the bottom of the printer.

If you switch the paper tray selection button* to use the rear feed tray you'll probably find it will print faxes successfully or you can put paper in the cassette tray...



*The paper tray selection button is just under (and slightly right of) the "Memory Card" button and has an icon image of the printer with two LED's (top and bottom). These lights indicate which of the trays is currently selected...


Hope that helps.

Dec 10, 2010 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Wont print ready light and alarm light flashing
When the printer "Ready" and "Alarm" LEDs flash as shown, please check the following points:
1.Paper Jam: Clear the paper jam referring to "How do I clear paper jams?"
If the printer does not automatically resume printing, press the control panel button.
2.No Paper/ Misfeed:
-The paper cassette may be out of paper or not properly installed.
-If it is empty, load a new stack of paper into the paper cassette.
-If there is paper in the paper cassette, make sure it is straight.
-If the paper is curled, straighten it before printing. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper cassette.
-Reduce the amount of paper in the paper cassette, and then try again.
-Make sure you use paper that meets Brother's recommended paper specifications.
-Reinstall the paper properly, and then press the control panel button. The printer will start printing again.

Dec 06, 2010 | Brother HL 1430 Laser Printer

1 Answer

I cant find my manual how to i place the paper underneath so it feeds through the bottom
You can use the paper cassette located at the bottom of the printer, on the front when the output paper tray is closed concealing the paper feed switch, the usb port and the cassette lamp.
1 Gently pull out the cassette from the printer.
2. Remove the cover from the cassette.
3. Place your paper in the cassette tray.
a. when using A5 or larger sized paper (non standard sized paper, pinch the tab and extend the cassette if needed.
b. legal sized paper is not loadable in the cassette
4. Do not load paper above the load limit mar4k.
5. Make sure the print side of the paper is facing down.
6. Align the paper stack against the right side of the cassette
7. Slide the paper guides so they fit the loaded paper stack.
8. The paper cassette will hold up to 150 sheets of plain paper, however you do not eant to stack any more than 50 sheets in the Paper Output Tray.
9. Reinsert the cassette into the printer. Then set the cover on the cassette. Now make sure the cassette is pushed al the way into the printer. (If long paper was used and the cassette was extended iy will now extend beyond the front of the printer
10. Prepare the paper output tray by opening the front cover and pulling out the tray extension until extended completely.
11. Press the paper feed switch so the cassette lamp lights.

You can slo select the paper source with the printer driver if you prefer .

Mar 07, 2010 | Canon Office Equipment & Supplies

1 Answer

False paper jam message on HP J6480 printer. I am trying to print photos on 4x6 HP premium plus photo paper. When I send the photo through, the printer successfully picks up one sheet, then passes it...
This should help.

Dec 22, 2009 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

Problem with SONY DCR-HC90E
Reinsert cassette message comes when mechanism doesnt load cassette properly. If this error message comes again n again, means mechanism has some problem and unable to do task.

Aug 07, 2008 | Cameras

Not finding what you are looking for?

View Most Popular

WorkForce WF-7620 Wireless Color All-in-One Inkjet Printer

  • Office Equipment & Supplies

Related Question

1010:0455544

  • Kyocera FS-4000DN Laser Printer

Open Questions:

0 Answers

how to designate specific paper tray for photos on Epson WF 7620

Nov 18, 2016 | Epson WorkForce WF-7620 Wireless Color...

0 Answers

how do i fix error code 0x97 on my WF7620 i have unplug and shut off

Oct 02, 2016 | Epson WorkForce WF-7620 Wireless Color...

Related Topics

Epson WorkForce WF-7620 Wireless Color All-in-One Inkjet Printer Logo

Related Topics:

3,664 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Epson WorkForce WF-4630...

Epson WorkForce WF-3640...

Epson Workforce 520 Printer

Epson Workforce 520 Printer

Epson WorkForce Office...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Epson Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6234 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
AdminGuide.pdf. user-manual-WorkForce...

WorkForce WF-7620...

PDF Manual
UsersGuide.pdf. user-manual-WorkForce...

WorkForce WF-7620...

PDF Manual
QuickGuide.pdf. user-manual-WorkForce...

WorkForce WF-7620...

Loading...