Question about Sanyo Video Cameras

Open Question

Sanyo EX220P tapes have no sound when connected to TV or computer. Bought Video Capture Kit from ClimaxDigital but still no sound.

Playing back old tapes give no sound - direct/indirectly played from camcorder

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

SOURCE: Jumpy Playback Through TV

but the problem sounds to be that the playback on the LCD is fine while the TV playback is problematic. I am currently having a similar problem using the three to three connection to the TV: audio is fine picture is completely distorted. I tried to adjust NTSC playback mode and changed it to NTSC and not to PAL TV, but nothing changed. Can you only use S-video lines with these cameras? sony dcr

Posted on Dec 27, 2006

Ad

Anonymous

  • 73 Answers

SOURCE: Will not playback tapes

a sony cleaning cassette may clear the gunk from your friend ' s possibly ? bad tapes ( do not rewind it - or the gunk will be redeposited ) ; if still no video , get an estimate to have your heads and guides cleaned . . . professionally ;

Posted on Aug 02, 2007

Ad

Anonymous

  • 71 Answers

SOURCE: old GE 8mm camcorder-no color when playing old tapes

Yes, this sounds like dirty heads, typical symptom for analogue 8mm.

Yes you can clean the heads. It's a delicate procedure, but, requires no disassembly. To clean your heads, I would run to Radio Shack and buy cleaning fluid refils. Take a Qtip and dampen it with the cleaning fluid. Open the camera, remove the tape and look for the video drum. Lightly rub the Qtip along the drum horizontal to the spin direction (not across the grain). Turn the drum and clean until you have swept the entire circumference.

Posted on May 03, 2009

Ranjith Kolary

  • 89 Answers

SOURCE: Video transfer

If you're using a Windows Vista Operating System it'snot possible to transfer the videos from the Camcorder to the Computer using the USB connection. The videos from the tape camcorders cannot be transferred to Windows Vista Operating System as there is no USB Streaming ooption available on the Windows Vista Operating System. The Camcorder uses the USB Streaming function to transfer the videos to the Computer. You may wish to purchase a i.LINK/Firewire cable to connect the Camcorder to the Computer in order to transfer the videos from the Camcorder to the Computer.
or
There is an update for driver on the Sony website to transfer the videos from the Camcorder to the Computer using the USB cable.
http://support.sony-europe.com/dime/downloads/downloads.aspx?site=odw_en_GB&m=DCR-HC42E&f=usbdrven_vista

You may also try installing the driver update for the Camcorder. The i.LINK cable gives a better video transfer qulaity than the USB transfer. The i.LINK cable used to connect the Camcorder to the computer depends on the number of pins available on the i.LINK/FIREWIRE port on the Computer. The i.LINK port on the Computer is a D shaped port which is labelled as i, DV, IEEE1394 and Firewire.

Posted on Jun 16, 2009

Anonymous

  • 1 Answer

SOURCE: canon hv 40 cannot import video to the computer

have tried everything - every combination of settings - my hv 40 and windows 7 and 4 diffrent programs can not capture hd video - will capture dv - can control camera from computer in hd mode but no program will switch to hd capture mode so if you find an answer please let me know

Posted on Dec 23, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an August VGB100 and Im trying to convert Hi8 tapes to DVD using a sony handycam. I cant get sound on the computer when Im capturing.


Im not sure about your computer setup. Are you capturing via usb or have dedicated video capture device? Do you have sound when connected camera to tv. Does your video capturing device require to supply sound separate for example from camera headphone jack to video capture device?

Sep 10, 2018 | Sony Video Cameras

1 Answer

How do I get vhs video onto my computer?


You need a TV capture card... the package includes connectors for VHS & other DV cameras, you also need of course a VHS player..

While the VHS player is playing your VHS tape... the computer can now record it via the TV capture card.

That's what I do... goodluck and don't forget to rate...

Feb 01, 2011 | KWorld DVD MAKER USB 2.0 (660448660114)

3 Answers

How can I transfer my 8mm tape to my computer? I need to have the film on a flash drive or dvd.


Assuming that you want to do your video work later (editing,DVD burning)in your PC.


1.Your PC must have video capture device(either built-in or add-on).
2.Properly set your video editing software to able to capture video form your device.
3.Connect your camera to your PC in regular manner,like when you connect it to your TV.
4.Have your camera in PLAYBACK mode.wind the tape to the beginning of the footage you want to capture.
5.Open your editing software.turn on capture mode.
6.Start capture.At the same time,start playing back the footage on the cam.
7.When all footage were captured,click stop capture.
8.Start your editing work.
9.when complete,save it to some uncompressed video format like *.avi for later burning to DVD or converting to other format.



For beginners,I recommend Windows Movie Maker video editing software that should come bundled in almost every computer.It's fast,simple but effective enough for home-movie work.Once your project is completed,save your movie in original .avi format for later burning to DVD,etc.



BTW forget the old-school Linear Editing (on the tape) thing.It's slow,complicate and much less flexible than Non-Linear method.

Sep 03, 2010 | Sony Handycam CCD-TR517 Camcorder

1 Answer

How can i edit the video if i finish filming


Assuming that you want to do your video editing in the PC rather than on the tape.


1.Your PC must have video capture device(either built-in or add-on).
2.Properly set your video editing software to able to capture video form your device.
3.Connect your camera to your PC in regular manner,like when you connect it to your TV.
4.Have your camera in PLAYBACK mode.wind the tape to the beginning of the footage you want to capture.
5.Open your editing software.turn on capture mode.
6.Start capture.At the same time,start playing back the footage on the cam.
7.When all footage were captured,click stop capture.
8.Start your editing work.
9.when complete,save it to some uncompressed video format like *.avi for later burning to DVD or converting to other format.



For beginners,I recommend Windows Movie Maker video editing software that should come bundled in almost every computer.It's fast,simple but effective enough for home-movie work.



BTW forget the old-school Linear Editing (on the tape) thing.It's slow,complicate and much less flexible than Non-Linear method.

Aug 07, 2010 | Sony Handycam CCDTRV118 Camcorder

1 Answer

I have old tapes from an old camcorder Sanyo VM-D66P that I want to capture to my pc, how do I do this?


There are several ways of converting your tapes to a digital format.
1. By routing it through a DV camcorder with AV-input (these are increasingly rare though. (using firewire).
2. By using a device like this, which converts to DV. (also connects via firewire). http://www.dv247.com/invt/23453
3. By using a device which captures to MPEG2.

The cheapest way is option 3, but it requires a working camcorder. You should purchase a device similar to this: http://www.avforums.com/forums/attachments/camcorders-video-editing/85846d1216145397-camcorder-computer-easycap.jpg


If you don't have your camcorder anymore, or it isn't functioning, you should try to get a second-hand 8mm camcorder with firewire. This way you are able to directly convert your tapes to your pc.
If you can't find a firewire camcorder you could just settle with a good functioning 8mm camcorder but you will have to buy a capture device as mentioned above.
Good luck!

Jun 06, 2010 | Sanyo Video Cameras

1 Answer

VHS to Easy capture to computer


The plugs you speak of are called RCA plugs, (Male side has an outside ring with "slots" around the edge, and a pin in the center. Female side has a short round "riser" with a hole in it). You need just standard Audio/Video hookup cables, available at any electronics store.. Walmart/Target/Kmart has them in the TV section. They get plugged into the Audio (Red & White) OUT of the VCR, into the Audio IN (Red & White) of the Easy Capture. The Yellow lead is for Video In/Out between the VCR and Easy Capture. The black is probably the S-Video connector, (round, has very small square hole, surronded by 4, 5, or 7 tiny pin holes) that can be also used to connect video/audio between VCR(if so equipped) and Easy Capture. Get a set of audio/video dubbing cables (abt $10 usually), connect Red to Red, White to White, Yellow to Yellow. Plug the Easy Capture USB cable into your computer (most likely), start the capture program. Start your vcr, hit Play. You should see your vcr tape playing on the computer screen.

Aug 18, 2009 | Televison & Video

1 Answer

Hiya


The only way to do this is to use video capture software and an input card that has a yellow video input.
Dan

May 07, 2008 | Video Cameras

1 Answer

IMac and ADVC 110 via firewire = Nothing


this just happened to me tonight...whats going on?? is this some recent leopard related error?

Oct 09, 2007 | Canopus ADVC-110 A/D Converter...

1 Answer

PV GS 35 wont play tapes from other cameras


perhaps it has to do with the SP and LP settings, I know certain video editing programs won't capture video recored in LP.

Aug 18, 2007 | Panasonic PV-GS35 Mini DV Digital...

1 Answer

JVC GR-D250 does not record properly


When playing the tape in the camera itself, do you hear sound? If so, its something with the connection cable... is not, you will need a professional repair, you can do nothing except the head clean which you did? Sorry.

Nov 23, 2005 | JVC GR-D250 Mini DV Digital Camcorder

Not finding what you are looking for?
Video Cameras Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Video Cameras Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Nicola Conroy

Level 3 Expert

1428 Answers

abdul rauf
abdul rauf

Level 2 Expert

483 Answers

Are you a Sanyo Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...