IT SAYS ON THE TRIMMER TO LUBRICATE OR OIL,,,,,WHAT AM I SUPPOSED TO LUBRICATE AND HOW? THANK YOU.
There should be 2 phillips head screws on the underside of the cutting blades.loosen them enough to where the 2 cutting blades are able to move freely then take some 3-in-1 oil and apply some in between the blades and tighten the bladesback down.Turn the cutters on for about 30 seconds and they should be good to go.Rate me FIXYA! if this helps! GOOD LUCK.
1,509 views
Usually answered in minutes!
×