Question about Health & Beauty

Open Question

I have a Jazzy 1143 power wheelchair. When I use the thing, the joystick cord gets hot. It seems to lose some power also. What can cause this?

Posted by James Jones on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jazzy 1143 has new batteries all lights are good still is very slow

it may be that the joystick has been programmed for indoor or slow reaction user, you will need it to be reprogrammed (this is normally a very cheap and easy thing to do, but you need a programmer or to get a mobility shop to re program it) with most joysticks it just plugs in to the charge / data 3 pin socket on the joystick and takes less than 5 mins. a lot of mobility shops will reprogram free in the hope you will use them for further work if needed. phone a few and see how you get on, you will need to be able to tell them the type of controller (joystick) your chair has, if you are unsure do a google "image search for "wheelchair controller types" look at the images to identify the type you have fitted.

Dec 09, 2014 | Health & Beauty

1 Answer

Why are the lights blinking and it won't go

read manual,lights flash when in security mode,everyt model has a unlock procedure with the buttons on the joystick control.

Jan 23, 2013 | Pride Mobility Jazzy 1143 Power Chair -...

1 Answer

Need price on joystick @ power cord for jet3 power chair controller # ab0511447

About $600.00 -$700.00 rebuilt if you can find one . Try contacting Pride Mobility @ 1-800-800-8586 ask for Jazzy tech support and ask about replacement joystick and cost Hope this helps

Jun 20, 2011 | Jet 3 Ultra Power Chair

2 Answers

I have a Jazzy 1121 wheelchair and need a face plate for the controller. The ss# is J40355044020. Where can I find one?

Contact Pride Mobility @ 1800-800-8586 ask for Jazzy tech support and ask if you can order a faceplate for your joystick Hope this helps you

Jun 16, 2011 | Pride Jazzy Select 6 Indoor Power...

1 Answer

What is the wire from the joystick to the back of the Jazzy 1113

That is the data cable that allows power and data input to your chair from the joystick Hope this helps

Apr 28, 2011 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Need new joystick controller for Jazzy 1103 ultra mini

Who bought the chair you or Medicare? If Medicare they will pay for most of the repair cost Contact Repair Xpress at 1-877-581-3733

Jul 20, 2010 | Pride Jazzy 1103 Ultra Indoor Power...

1 Answer

I have a Pride 1143 Jazzy Electric wheel chair and the controller is constantly flashing. This happened after I drove into my van and locked into the e-zloc. My husband sid I drove in too fast and caused...


Rapid flash of lights indicates a fault in the VSI or the electrical system. You need to refer to " VSI Error Codes" on page#32 of this User Manual:

Pride 1143 Jazzy Electric wheel chair User Manual

Please do accept the solution if the issue is resolved or else revert for further assistance.


Jul 25, 2009 | Select Jazzy Used Electric Wheelchair

1 Answer

Problem with joystick on Jazzy 1103 ultra

You will need to take it in for repair. 8 bar flash usually means you have a bad joystick/controller. They can sometimes send it in to the manufacturer to have it repaired. Find a reputable dealer and relay this info to them.

Apr 01, 2009 | Pride Jazzy 1103 Ultra Indoor Power...

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

ray gallant

Level 3 Expert

70835 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34963 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides