Check all the related components to the STR. Any one or more resistors or zener diode can poise this problem. Replace all the suspected one at one time, before replacing the STR. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.
SOURCE: LG TV STR F 6654 AND OTHER ALL PARTS OK TWO OPTOCUPLER IS OK BUT POWER NOT OUT PUT PROBLEM SOLVE
Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase " my service table today " in the search box at the top right of the display window, to get gathered some pages which has the details of practical experiences to the author of that site.
83 views
Usually answered in minutes!
×