Question about Frigidaire FAD504DUD Dehumidifier

1 Answer

Dehumidifier Thermistor Is there a dehumidifier Thermistor that I can buy that is compatible with Frigidaire's FAD504DUD dehumidifier?

Posted by Mark Hesprich on

Ad

1 Answer

deton8 von Splosion

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 3,340 Answers

There is NOT...

By your model number...
I bounce off of a lot of other (subsequent models (I presume))...

But your model does NOT resolve to any serious parts
USA domestic suppliers... not even good drawings!!

I tried appliancepartspros, easyapplianceparts, repairclinic, partsselect & searspartsdirect.com

Got spanked pretty good... Looked at related circuit boards... but none had any significant detail to determine a THERMISTER
FROM... Do not match

Time to get the ACTUAL NUMBERS OFF OF your thermistor...
and go to electronic houses... eBay, grainger... even RadioShack

In my humbled opinion...

FAD504DUD ENG10 12 FAD704DWD Dehumidifier Display Circuit Board Frigidaire...

Water Filters Lawn Garden Appliance Parts

PartSelect Appliance Parts and Repair Help

Find Your Appliance Parts

Posted on Jun 03, 2016

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a recall on Frigidaire dehumidifier Model FAD504DUD


Some dehumidifiers with the model number, FAD504DUD, are subject to a recall. Record the serial number and then go to https://www.recallrtr.com/dehumidifier to check if your unit was manufactured in the bad batch.

Without the serial number, I can't be sure if your unit is in the 2016 recall. For details, you can look at https://www.cpsc.gov/Recalls/2017/Dehumidifiers-Made-by-Midea-Recalled .

I hope this helps.

Cindy Wells

Jan 26, 2017 | Frigidaire Dehumidifiers

1 Answer

I have a Frigidaire LAD504TDL dehumidifier and code 'ES' shows on display. What does this code mean? Unit runs but not much water in tank.


Good Morning Mark, thank you for your post!

I see that your Frigidaire dehumidifier is displaying an error code of "ES" and you would like to the meaning of that error code. The "ES" error code stands for evaporator thermistor error. This could be a possible problem with your control panel, thermistor, or a wiring harness. I would recommend contacting your manufacturer for further assistance with your dehumidifier. Best of luck! -Matt

Jun 08, 2015 | Frigidaire Dehumidifiers

1 Answer

Why freezes up?


Good Afternoon Friend,

I understand that your Frigidaire dehumidifier, model# FAD504DUD, is freezing up. First, if your dehumidifier has been turned on recently, this is normal due to refrigerant rushing through the coil. Frost will usually disappear within 60 minutes. Secondly, make sure the room temperature is above 41 degrees Fahrenheit. If it is too cold in the room, the coils can freeze. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully.

-Best Regards-
WP

Jun 20, 2014 | Frigidaire Dehumidifier Fad504dud

2 Answers

Why does blower wheel stop on Frigidaire dehumdifier?


Good Afternoon Desi,

I understand that the blower wheel is not spinning on your Frigidaire dehumidifier, model# FAD504DUD. I also see that the compressor will stay on unless the dehumidifier is unplugged. I suggest you contact the manufacturer for further assistance. They can possibly clarify why the compressor stays on and why the blower fan is not working. If not, they should at least be able to point you in the right direction of having your dehumidifier working. Hope this is helpful.

-Best Regards-
WP

May 30, 2014 | Frigidaire FAD504DUD White Energy Star 50...

1 Answer

How to clean the filter


Good Afternoon Tad, thank you for allowing me to assist you!

First remove the bucket to reach the filter of your Frigidaire dehumidifier, FAD504DUD. When you locate the filter, pull it downwards. The filter can be clean by either washing it with clean water or using a vacuum cleaner extension hose. If you use clean water, please allow the filter to dry. Once the filter is reinstalled then replace the bucket. To extinguish the light simply press the FILTER button and your dehumidifier will resume normal operations.

Hope this helps!

Jan 31, 2014 | Frigidaire Dehumidifier Fad504dud

1 Answer

Frigidaire dehumidifier model # FDL50S1 clicking very loudly.


If the unit is not running fully, but you have this noise, sounds like the internal fan might be the culprit. Contact your manufacturer for further options.

Aug 24, 2012 | Frigidaire Fdl50s1 Air Purifier &...

2 Answers

Frigidaire Dehumidifier gives F2 error code and no longer runs.


F1 is room temperarure sensor error. F2 is tube temperature sensor error.

The room sensor usually is located in the front of the condenser. The tube sensor is usually plugged in a tube near the condensor.

The tube temperature sensor (thermistor) should be about 10K ohms.

Aug 31, 2009 | Frigidaire FDL45P1 Dehumidifier

1 Answer

2008 Frigidaire 50 pint Dehumidifier from Lowes


You can test it out by disconnecting the power cord, wait five minutes and plug it back in. If it retains the original settings you are good to go. If you are wondering before purchasing a new unit ask before you buy.

Apr 25, 2008 | Frigidaire FDL45P1 Dehumidifier

Not finding what you are looking for?
Frigidaire FAD504DUD Dehumidifier Logo

Related Topics:

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dehumidifiers Experts

Cindy Wells

Level 3 Expert

6241 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Frigidaire Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...