IPL fault, TE22000 how to troubleshoot?

To set the SAM4S ER-380 cash register to automatically print a second copy of the receipt after a transaction, you need to follow these steps:

1. Turn on the cash register and press the MODE key until you see the REG mode.
2. Press the PROGRAM key and enter your password (the default password is 0000).
3. Press the 3 key for PRINTING.
4. Press the 1 key for RECEIPT.
5. Press the 3 key for AFTER PRINT.
6. Press the 1 key for DUP (Duplicate Print).
7. Press the CASH key to save your changes.

Now, the cash register will automatically print a duplicate receipt after each transaction.

You have halted the firmware due to a failure to load IPL. This is recoverable if you do a hard reset. See your service and programming manuals for hard reset and IPL instructions. Make sure you have the correct IPL and loader for your region. If you don't need to replace the IPL then do not attempt it

This is a communication error. There are two thpes os serial cable. You are using a straight thru cable you need a "null modem cable or you will get no communication. Confirmed. our serial cable needs to be a crossover "null Modem" type if I remember correctly. you probably have a straight through cable which wont work. Also make sure you are using the correct port number for your serial converter (often port 4). Check it in device manager.

I would like to help you much but your question is not clear. Please be specific.

that is the correct way . Maybe you need to activate sdcard option on the new machine it could be off

Hi. This is usually caused by two things. Firstly, the printer has a problem and cannot turn or the rotation sensing is at fault. Secondly, the IPL (operating system or firmware) of the machine has been lost and the machine now doesn't know how to be a cash register any more. Both of these problems can be fixed by a technician but are a bit much to fix yourself. The TKT500 is a good machine so it is worth getting a quote. Feel free to come back to me with their diagnosis if you want me to check if they are ripping you off.

Oh dear. Why are you wiping the IPL? You are seriously screwing up the firmware in the machine. It might be best to see a dealer to have them change IPLs for you

MY NEW ELECTRONIC CASH REGISTER SHARP XE-A203 DSPLAYED IPL ON IT . WHAT DO I DO??

Hi.
Try this:

Turn key to program mode.
3 SUBTOTAL
0
PLU button
SUBTOTAL

If you had tax on this button, it will need to be set again. Just let me know if it is not calculating correctly.

Mark

shap XE-A203 IPL PROBLEM