Hi my MW512 Fisher Paykel doesn't spin properly washing still comes out with water still on

Question edited for clarity. Please always include full make and model. Question moved to Fisher and Paykel category.

Whereas many companies have a serial number look up, or a code in the serial number, Fiaher and Paykel don't. you would have ot contact them direct.

https://www.google.com/search?q=fisher+and+paykel+mw512+serial+number+lookup

..

check your pumped its either got something jammed in it or its faulty

it will be the pump. just check again where you did last time. there may be something in the hose, coins can get stuck, and lint. check also the pump is not getting very hot.

this sounds like the motor controller cant start the motor. I would be looking at the motor controller itself.
when it's filling with water, does the bowl go around slowly?

Disconnect from power & Bail out all the water you can before removing pump.

Check the out of balance switch (under the larger Grey board)
for corrosion on the terminals and replace if faulty.

see this causes:
t doesn't pump or spin
frozen puller, or broken belt, lid switch defective or open replace
It pumps, but doesn't spin
lid switch defective, motor coupler defective,belt broken, clutch worn,drive motor defective,transmission is not shifting properly, basket worn,
It spins only with the lid closed
for security reason, only spin with the lid closed

Hi - Fisher & Paykels does not come with heaters fitted, the two hot/cold inlets are used in prortion to the settings of the wash cycle in use.

So with a cold tap only you would expect cold wash functions only, if you accidently chose a warm wash the machine will start beeping as there is nothing to bring the temp level to the expected setting.

Hope this helps you choose..

Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing Machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Unplug it for a few minutes and then replug it in and hit cancel