Question about Brother DCP 115C All-In-One InkJet Printer

1 Answer

Can printer be configured as monochrome - Brother DCP 115C All-In-One InkJet Printer

Posted by Ian Walker on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 181 Answers

Check out page 13 of the manual. Change the setting to grayscale.

Posted on Apr 28, 2016


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you retrive the meter reading on HPLJP2035N

how to retrieve the meter reading-
allow the machine to come to ready-
press the down arrow on the printer keypad ( information) then press tick -
press down arrow again (configuration) press tick.
the printer now print 2-3 pages of printer configurations inc life cycles and net card configs

Jan 14, 2014 | HP P2035N LaserJet Monochrome Printer

1 Answer

How do you retrieve the meter reading on the HPLJP2035n?

enter the menu using the menu button press down till you get to information press enter move down to configuration and press enter (tick) select configuration page and print look for the term Engine Cycles ( this is how 'old' the machine is in copy count terms)

Jan 14, 2014 | HP P2035N LaserJet Monochrome Printer

1 Answer

Lexmark ts654 factory reset

You need to enter the Configuration Menu first. To do this,

1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons after ten seconds.
The message CONFIG MENU displays on the top line of the operator panel.

Once in the Config Menu, scroll and look for Factory Defaults.

Sep 14, 2012 | Lexmark ts654dn laserjet printer...

1 Answer

How do i find the IP of 9022 Monochrome Laser

First, are you sure you have network capability. This is an option. Since there is no control panel display on this printer, you'll have to use the configuration software provided by Tally Genicom.

Jul 20, 2011 | TallyGenicom 9022 Laser Printer

1 Answer

Hi. I need to make default setting to print grayscale. Kindly give me the steps. Thanks

Color/black mix
This item allows you to configure printer settings to optimize printer and cartridge performance for the printing environment. If the printer is primarily used for black printing (over two-thirds of the pages are black only), change the printer settings to MOSTLY BLACK PAGES.

Setting the color/black mix
1. Press Menu to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight COLOR/BLACK MIX.
7. Press to select COLOR/BLACK MIX.
8. Press or to select the desired option. (Select MOSTLY BLACK PAGES)
9. Press to select the option.
10. Press Menu.

Select MOSTLY BLACK PAGES if you print mostly monochrome print jobs, or a combination of color and monochrome print jobs.
Product User Manual (You may like to refer to Page 65)

Hope it helps! Good Luck! Thanks for using Fixya!

Jun 16, 2011 | HP LaserJet 4700 Printer

1 Answer

Is there a way to find out the total copy count for the printer?

You can get the copy count for the MF6550 by using the following procedure:

- Press Additional Functions
- Press 2
- Press 8
- Press Additional Functions again.
- Scroll down through the options. There will be an option for Counter -- select it and the copy count will be displayed on the screen.

For page count and configuration page instructions on other copiers, printers, and fax machines, visit the How to Print Configuration Pages website.

Jun 15, 2011 | Canon imageCLASS MF6550 Monochrome Laser...

1 Answer

How to disable color printing on an hp cp2025 printer? I want to stop use of color cartridges until I specifically want to consume them.

You can adjust the device settings under the driver properties.
1. Open your printer s and hardware folder
2. Right Click on the driver for the CP2025.
3. Vista/ Xp click on properties, Win 7 Printer Properties
4. Go to the Device Settings tab
5. Under installable options:
6. Change the device type to Monochrome and apply
7. If the printer is still printing in color select automatic configuration and select configure now

For more questions please write;

[email protected]

Jul 07, 2010 | HP Laserjet Cp2025n Printer

1 Answer

Printer print only black while all cartridges are

Check your printer configuration and make sure you haven't mistakenly set it to monochrome (black and white).

Nov 27, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Print copy is reduced

Go to the printer menu and check those settings. It is a configuration problem

Oct 12, 2008 | Canon imageCLASS MF6530 Monochrome Laser...

Not finding what you are looking for?
Brother DCP 115C All-In-One InkJet Printer Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6958 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides