I uploaded the latest software from Golflogix and now the unit will NOT turn back on. Any ideas? Is there a full system reset on the unit?

the reset requires connecting it to the computer. try tightening the cable,

hope this link will help..

http://www.golf-plus.co.uk/howtodownloadmaps.php

Hello. Here is the contact info for Garmin

http://www.golflogix.com/WebSite/GarminHome.aspx

Contact them and ask if they can talk you through a factory reset. Otherwise, find out how to send it to them for repair. J.

This issue appears with certain edition of TP2 devices. It has been fixed in the latest version.

click on help in the course manager software, then click on "How Do I restore my golflogix unit". connect it and turn it on. when it tells you its restored, turn it off and on, and load your courses again. FORE!

call golflogix at 8779770162. BE SURE TO TELL THEM THAT IT HAPPENED WHEN YOU LOADED THE SOFTWARE UPDATE! otherwise, they might not warranty it.

go to golfgps.com and install the software on the new computer.

If you downloaded the new software on a mac it doesn't work. You call the company and will receive a new device, then send the bad one back. They take care of shipping.

I have same problem and received the following reply from Golflogix:

We have recently released the Windows Vista, and Windows XP software update to solve this issue. It is a process where our technicians will have to manually place the software update on your computer. We would be more then happy to go through the process of setting up the software on your PC.
To reach us to install the software update please call 1-877-977-0162. We are open Monday – Friday 7AM – 6PM Pacific Standard Time. When you call it is important that you are by the computer with your GPS unit and connecting USB cable.
If you are a MAC user please contact our customer service department for further information.

Hi,

Offhand, two possibilities:
1. erroneous sensor reading(s) causing system to respond likewise erroneously; and/or
2. firmware/software glitch.

Initially, I would suggest a full hard reset, that is unplug from the mains for an hour or so. This would normally revert the unit back to factory default (assuming no hardware problem). Additionally, you may want to check the sensor(s) like the a bucket full sensor often would be a float switch of some kind.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.