My camera is Samsung 10.2 and it want stay on it goes off and on it self

Verify your facebook app is up to date. Verify that your samsung tablet software is up to date. If they are not. Update your software.

You want to set the Self-Timer ... to delay the shot, say, by 2, 5, 10 (or a specified number of) seconds, assuming your camera (model) has that feature/capability. Which camera (model) do you have ?

Press the self-timer button (right-arrow on the circular multiselector) until the desired mode shows on the monitor. Your choices are 2 seconds, 10 seconds, and double. Press the shutter release button to start the timer.

Full details are in the "Self-timer/Right button" section in the manual, page 27 in the edition on Samsung's web site at
http://downloadcenter.samsung.com/content/UM/200803/20080324103057703_English.pdf

Most cameras flash twice; the first one is for setting the exposure, the second one is for real. About the best you can do is warn your targets that the camera is going to flash twice.

Yes, the L100 has a self-timer. Press Right on the selector (the clock icon) until the desired mode indicator appears on the display. Your choices are 10-second delay, 2-second delay, double self-timer, and motion timer.

The self-timer is described on pages 29-30 in my copy of the manual.

Make sure you're in a recording mode other than VOICE.

Press the Self-Timer button (right button) until the display shows the desired mode. Your choices are 10-second mode (the camera takes a picture ten seconds after you press the shutter button), 2-second mode (the camera takes a picture two seconds after you press the shutter button), and Double-self-timer (the camera takes a picture ten seconds after you press the shutter button, then takes another two seconds later).

You can cancel the self-timer mode by pressing the Self-Timer button again.

The 10-second mode allows you to run back for a group picture. The 2-second mode is useful when you want to take a picture without fear of camera shake; simply place the camera on a steady support such as a tripod. The Double mode increases the chances of getting a picture with everybody's eyes open.

No problem! Like all Samsung Digimax cameras, the self-timer is located by pressing the round navigation key once to the right/East/3 o'clock (it has a picture of a clock engraved on it). Pressing once gives a 10 second timer, twice gives a 25 second timer and the third press gives a multiple-burst self-timer whilst the fourth press will de-activate all timer functions. After selecting the appropriate self timer, depress the shutter button to activate.
I hope that this helps!

Hey hpnotiq_babe,
Directions on how to set the self timer on this camera are on page 27 of your camera manual. I have included a link to a PDF download of your camera manual in case you need it. I have copied the instructions on how to set the self timer on your camera below. I hope this helps!

● Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of VOICE RECORDING
mode.
2. Press the SELF-TIMER button until the desired
mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon
appears on the LCD monitor. In Movie Clip mode,
only the 10-second self-timer will work.
•2SEC self-timer ( )
: Pressing the shutter button will allow an
interval of 2 seconds before the image is
taken.
•10SEC self-timer ( )
: Pressing the shutter button will allow an
interval of 10 seconds before the image is taken.
•Double self-timer ( )
: A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken. When using the flash, the 2-second self-timer
may be delayed for longer than 2 seconds depending on the flash charge
time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.

http://www.samsungcamera.com/customer/cus_main.asp?cat_uid=11

Sincerely,
Allan
Go Ahead. Use Us.

Here's how it works.

Press the Menu button. (Some settings are unavailable in some modes.)
Press 'up arrow' or 'down arrow' to get to the 'Self Timer' option which looks like a clock set at 10 minutes to 10.
Press the OK button.
Press the Menu button to exit the menu.
(This setting will stay until you take a picture or turn the mode dial).

Good Luck

Sure ... be sure to use a tripod or other device to place the camera for stability.

• Set the MODE DIAL to your desired photo setting
• Press the SELF-TIMER button on the button pad (looks like a clock/timer on the right button pad)
• There are three settings
• 10 SEC - 10 seconds will pass until the picture is taken
• 2 SEC - 2 seconds until the picture is taken
• Double self-timer - a picture will be taken after 10 seconds, and then after 2 seconds a second picture will be taken.
  
• Press the SHUTTER button to begin the timer.
  
• Jump in the shot! =)

Please rate FixYa! ThankYa!

Hi there,
by the way in setting the timer for your camera here is what you are going to do...

-turn the camera on
-set the camera in recording
-press the Right Button beside the menu button (the incomplete circle)
-and then you will see that there will an icon showing in the left side part of the screen of the camera.

Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work.
•2SEC self-timer (icon of incomplete circle with 2S)
: Pressing the shutter button will allow an interval of 2 seconds before the image is
taken.
•10SEC self-timer (incomplete circle)
: Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
•Double self-timer (double incomplete circle)
: A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.