How to set date sonata ocean watch - Ocean Watches

If its a super fibre 3 series with 4 butons ( set, adj, mode, light)
Just keep the set button pressed for about 5 seconds, then use mode to select next( date, time, year etc) and adj to change the respective data. Then press Set once and its done.
Cheers

Just hold the reset button until the seconds start blinking!!!!!
Then to change secon press sec/strt button or to changr hour,min or date just press mode !!!!!!!!!!!!!!!!!!!!!!

Take it in for servicing. There's nothing you can do to fix this. There's something going on with the movement.

http://www.ehow.com/how_7773270_set-date-omega-planet-ocean.html

it would appear that your home settings are not correct. Refer to 'casio G100H manual' to fix this. You can google it and follow the home setting instructions

hi, you know the part you pull out to adjust the time well this also adjust the date you need to pull it out slightly less than you do to adjust the time or slightly more and this will then let you adjust the date, it can be a bit difficult to get it right but it can be done.

let me know if you have any problems ok

mcdevito75 here, Let"s hope your description of the problem with your watch is wrong. Try this sequence, First, wind your watch, the automatic continues to wind your watch when you where it but to get it started, wind it 20--30 times. 2nd, your crown locks down, turn the stem Clockwise to un-lock it (the stem) now pull the stem all the way out then back in 1/2 way to set date. Set DATE to DATE before the real date turn crown counterclockwise. Now pull out crown all the way and turn clockwise to set the DATE and time (real Date) push the crown back in and turn counterclockwise to lock the crown. If this doesn"t work, look for a small watch repair shop in your area for this adjustment.

the hair dryer didnt do any damage but the water might have destroyed the movement, some ar inexpensive, get an est. to replace it. make sure u go to a good jewelry store.

seamasters are ment for deep driving so try unscrewing the crown first

altitude changes depending on pressure; because you are along ocean, you experience it more than usual.
M problem is that temperature remains higher than normal one (30°C), can you solve it ?