I have a model # 955031636 Kenmore coldspot indoor light comes on nothing else,possible causes?

It is possible that there is a switch for the dispenser light on your Kenmore Coldspot refrigerator. Some models have a separate light switch that may be located near the dispenser or inside the refrigerator compartment. You can try checking the user manual for your specific model or contact Kenmore customer service for more information.
If the dispenser light still does not turn on after checking for a separate switch, there may be an issue with the wiring or control board for the dispenser. In this case, it may be best to contact a professional technician for further diagnosis and repair.

Yes, it sounds like a dead short in the defrost heater. Just sit near it at the allotted time, and you will hear it.

Diagnostic mode
https://www.google.com/search?q=Kenmore+Coldspot+106.58582892+diagnostic+mode

Defrost timer and heater
https://www.google.com/search?q=Kenmore+Coldspot+106.58582892+defrost+heater

Parts
https://www.google.com/search?rlz=1C1QJDB_enCA643CA644&sxsrf=AOaemvKjSgKXGkag5WfNS1McqUDzRjE7gg:1638140779248&q=Kenmore+Coldspot+%22106.58582892%22+parts+schematic

..

open the freezer door and empty the shelves look at the bottom of the panel in the freezer where the air holes are if it frozen or iced up. thats your problem your air flow is blocked with ice. other possibility would be a fan failure.

What is the model number listed inside the refrigerator section?

Suggest you take the ice maker out and defrost it. You propably have ice crystal buildup and causing it to labor harder.

If the water filter is old the seals will leak into the evaporative tray overflowing it. Replace the filter or give it a turn to bypass.

Good to see you put your model number down correctly. Do the lights come on inside when you open door? I noticed your refrigerator has a control board inside the fresh food section behind the control panel I want you to unplug the refrigerator and examine that board for burn marks or loose solder connections on both Sides. Then let me know what you find. Thanks, Sea breeze My email is [email protected] Web Site http://servicepartstec.blogspot.com/ Part Number for Control board is 8201528

Try to search for the solution within the manual: Kenmore Coldspot Model 106 Manual

first ,do you have power to it,is the lights coming on?2-is there frost building in the freezer on the back wall?i think you have a defrost problem,let me know more-mike