How to connect to linksys wrt1900ACS router? - MFC Brother Office Equipment & Supplies

It depends on the router brand. Once you login to the router, there could be a couple of different menu options that have the password change option (it depends on the brand). Look for tools, administration and find the password option. Then enter the new password. It will likely make you relogin after the password is saved.

On some of the newer routers WRT1900ac, the password change option is under the connectivity tab.

Is it a new router? Your Linksys WRT120N needs resetting. Reset the Linksys router & reconfigure as per your requirement. I had two such routers giving trouble for the WiFi connectivity & which were new. You will be able to connect your router.

sonsunny

there is nothing issue with the linksys ist chk the ipaddress which u had provided to the modem and router is in same serious for eg: if ur modem is in 192.168.1.1 ten provide ur router ip as 192.168.0.1 and also chk whether the connection type is in PPPoE and also chk whether u r able to browse through modem which is provided by the ISP....

Here's what you can do. Don't connect the Linksys router yet to the hub. Connect 1 computer directly to the Linksys router. Access the router's setup page of the Linksys router thru http://192.168.1.1

It will prompt you for username and password. No username and password is admin.

Look for Local IP Address or LAN IP Address. Change the LAN or Local IP Address of the Linksys router to 192.168.5.1 then click on Save Settings at the bottom. Right after saving the settings, unplug the power of the Linksys router, connect it to the hub and it should be good to go.

1. How do you connect your Linksys router to Belkin router? Do you connect your Linksys router to the Internet/WAN port of the Belkin?
2. If so, what is the Internet connection type set in your Belkin router? Is it dynamic?
3. If the Belkin router is set to dynamic IP and if it is obtaining an IP address from your Linksys router(you may check the status page of your Belkin router and look for IP address), then you may need to forward or set that IP address as the DMZ to your Linksys router. Make sure that XBOX is still configured as the DMZ host in your Belkin

Hope this helps!