Question about Sanyo Televison & Video

1 Answer

Where is the backlight inverter located in an Sanyo 32 LCD model DP32242 television? Does anyone know if it is part of the power supply board?

I replaced the LED driver board and that didn't do it. There also is no light seen through the vents in the back when it is on. It has audio, the picture is seen when I do the flashlight test and I can see the menu when I bring it up. By what I have read it is the backlight inverter. The TV is only about three years old.

Posted by Anonymous on

Ad

1 Answer

Brad Brown

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 18,403 Answers

Http://www.shopjimmy.com/toshiba-pk101v1780i-power-supply-unit.htm

Posted on Apr 17, 2016

  • 1 more comment 
  • Anonymous Apr 17, 2016

    Thanks. So it is part of the power supply unit? I have found a few online.

  • Brad Brown Apr 17, 2016

    That set is integrated power and backlight

  • Anonymous Apr 17, 2016

    Ok, I want to order what I need to. Thanks so much!

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the inverter board located in the sanyo dp42849


To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
http://electronicshelponline.blogspot.com/

Aug 22, 2012 | Sanyo DP42849 42 in. HDTV

1 Answer

My 42" hd Sanyo flat


chances are your backlight inverter circuit has failed, repaired one a few months back with the same problem. To verify this, take the tv in a dark room. plug it in and take a bright\ flash light and shine it on the screen. turn the set on, you should see either the screen saver or video from your source. If this is the case, your inverter is at fault. Depending on your model, your backlight inverter is built onto your power supply board so you will have to replace the power supply/inverter board. Not hard to do, you can do it yourself with care.

Sep 23, 2011 | Sanyo 42 in. LCD TV

1 Answer

I replaced the backlight inverter board on my 32 in. LCD Sanyo model Dp32746, but I still have no video. The audio works fine and from time to time it looks like you see a faint image on the screen. I...


Did you chaeck first to find out if the power supply is putting out 24vdc for the inverter board, and also if the inverter is getting the backlight_on signal from the main board.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps

Oct 08, 2010 | Sanyo DP32746 32 in. LCD Television

1 Answer

Akai lct32 inch sound but picture


This failure is cause by the absence of 24 volts from the power supply to the backlight inverter board.
Defective backlight inverter board.
Defective CCFL that is inside behind the screen.
The easier way to troubleshoot it is by measuring the voltage from the power supply, if the voltage is present then the next step is to replace the backlight inverter board and lastly if the TV doesn't work; then the repair is a bit more challenging to replace the CCFL light(s).
Let me know if you require further assistance.

Aug 24, 2010 | Akai LCT3201AD 32 in. LCD Television

1 Answer

My sanyo screen is black but there is sound tv worked fine this morning


There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

Nov 14, 2009 | Sanyo DP32746 32 in. LCD Television

1 Answer

Sound no picture


You need to look at two places, one is the backlight inverter board (hard to get to), thesecond place is the power supply module, look for burnt parts, bad capacitors.
http://en.wikipedia.org/wiki/Capacitor_plague

Nov 11, 2009 | Sanyo DP32746 32 in. LCD Television

1 Answer

PLTV 26 LCD TV sound-no picture


I would suggest to check the 24 volts from the power supply to the backlight inverter board. If the voltgage is missing or lower then 20 volts, the power supply is defective. If the voltage is correct, you might have a defective light inside the TV behind the screen since you've replaced the backlight inverter board; you now the failure is not there. The lights are connected to the backlight inverter board.
Let me know if you need further assistance.

Jul 30, 2009 | Protron PLTV-32 Television

1 Answer

Sound with no picture..backlight working


This failure could be due to a backlight inverter board or the power supply is not providing the 24 volts to it.
The way to fix it is by measuring the voltages from the power supply to the backlight inverter board, if the voltage is present then the backlight inverter board is defective and will need to be replace. If the voltage is lower then 20 volts, then is a power supply failure.
Click here to find the backlight inverter board.
Let me know if you need further assistance. I repair power supplies for all LCD models.

Jul 24, 2009 | ViewSonic N3251w 32 in. LCD HDTV

1 Answer

I have a 32" TV/DVD combo westinghouse LCD TV. When I turn the TV on I get no picture. There is sound. DVD player does not show picture either, I have sound but no picture.


This is a backlight or inverter Problem. Based on the model you have, I am guessing the inverter is defective.

Inverter is defined as the board in the TV that supplies power for the flourescent lights inside the LCD TV that provide backlighting for the TV's Display

Jun 22, 2009 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...