ReplaceToshiba Satellite Pro 6100 laptop CMOS battery

It's flat and circular like a watch battery or a hockey puck.

Most Toshiba 6100s come standard with wireless cards installed. If you're unsure, just turn on the WiFI antenna switch (near its SD card slot) and see if the WiFi access LED lights up (the WiFi LED is the rightmost LED on the front of the unit) -- if it lights up, then you've got a stock Wireless card in your system.

Email me if you can't determine which card you have.

The problem could be your display. Use the VGA port on the side of your laptop to connect it to a computer monitor, this will let you know if your system is posting or not. (If you see the Boot Screen it is posting).

this site shows you how to disassemble toshiba laptops http://www.irisvista.com/tech/
how to disassemble a P300 http://www.laptopka.com/2009/05/10/disassemble-toshiba-satellite-p300-p305-laptop/
I could not find details on the toshiba - have a read here http://www.fixya.com/support/t248610-trying_locate_cmos_battery_toshiba
http://www.tomshardware.co.uk/forum/54832-20-replace-cmos-battery-toshiba-satellite-s151
This site has some examples of different batteries http://www.laptopparts101.com/cmos-rtc-battery/

Please send your laptop details to [email protected] and I will find the correct driver for you and e-mail it to you.

aside from the battery (big one) there is another battery connected to your motherboard, it is not accessible unless you open the casing of your laptop.

bring it to a service center and have it replace(it is almost a size of a watch battery)

All you need to do is Power Drain,
First you need to unplug battery and power cable from the laptop,
then, press and hold the power button for 20 sec without the battery and power cable,

then connect the power cable back in to the laptop(NO NEED OF BATTERY NOW), then turn on the laptop, if its turing on then you can turn off the laptop, then connect the battery back,

it might be your motherboard

download your laptop driver from here:
http://www.driverfiles.net/Notebooks/Toshiba/Satellite-Pro-6100/download/page,sh,31303,221,19,.html

also this one:

http://www.driver-download.net/toshiba/notebooks/satellite-pro-6100/


good luck

The Password can be removed via the printer port
What you need is a password removal tool, It removes the Bios and start-up passwords.
It costs about £5.00. Easy to build but it costs more to put the kit together.
I think you were quite hard on the assistance.
People here are just trying to help. At least appreciate that!